2024 Mustang FORScan List / Database / Spreadsheet (by Livinitup)

[Warlords650]

Has anyone figured out how to get the GTD Ipc gauges yet?

Sponsored

 

[fisherwhite]

Has anyone figured out which is correct for 2024 ecoboost premium.

Every AI says this "727-01-02 x*xx. 0=Flat EQ" but the spreadsheet says its "727-01-02 xxx*"

Thanks!

Pretty sure that’s referring to previous generation(s).
I’d trust the spreadsheet over AI.

 

[Nolasalt]

i tried, but it does not work even if everything is enabled

Just curious if anyone has found success with the global close since roket posted this in 2024.

 

[GrabThatBlue]

Just curious if anyone has found success with the global close since roket posted this in 2024.

The Mustang doesn't have the hardware to make it work.

 

[Aggie1999]

The Mustang doesn't have the hardware to make it work.

Yes I'm an Aggie and thus I ask dumb and obvious questions, but that don't make no sense to me. It has the hardware to roll the windows up, soooo.... what it needs a flux capacitor or a neural interlink something or another?

 

[ChrisMattice]

Yes I'm an Aggie and thus I ask dumb and obvious questions, but that don't make no sense to me. It has the hardware to roll the windows up, soooo.... what it needs a flux capacitor or a neural interlink something or another?

This has never been a thing. The S550's couldn't do it either. I believe it was never an active config and they never bothered adding it.

 

[ChrisMattice]

I haven't been on the forums for a minute. Has anyone seen if the RTR animations have been added in some of the recent updates?

 

[2016-Ford-Mustang]

What modules in forscan control the drive modes, asking for my S650 dash swap, I have a list of drive modes (like 8 of them) saying normal and a blank picture for eachone, I feel I have a as built data corruption (Basically meaning S550 trying to communicate to S650 IPC resulting in Invalid data, also is there a module or coding that shows the cruise control icon, I have working cruise control but no icon that comes on

 

[rugedraw]

What modules in forscan control the drive modes, asking for my S650 dash swap, I have a list of drive modes (like 8 of them) saying normal and a blank picture for eachone, I feel I have a as built data corruption (Basically meaning S550 trying to communicate to S650 IPC resulting in Invalid data, also is there a module or coding that shows the cruise control icon, I have working cruise control but no icon that comes on

You are exploring uncharter territoty brother. I know the drive modes need to be enabled in the IPC in a few spots. I would control F and search for drive in the spreadsheet under the IPC. Also, enable drive modes here in the APIM:

 

[Danozamo]

APIM
7D0-05-01 2186 xxxx xx--
7D0-09-02 xxxx x500 xD--

IPC
720-03-01 x1xx xxxx xx--
720-09-01 xxxx xxxx 9x--

IPMA
706-01-01 xx4x xxxx xx--
706-02-01 6xxx xxxx xx--

After changing all the lines in the 3 modules, go to the wrench icon and reboot the modules one by one IPC - IPMA - APIM.

Good luck and let me know if it works. If not, than probably there is no hardware in your car that can make this work.

Hey! Is there any way you can help me activating the speed sign?


This are my “as is”:


7D0-05-01 0007 3000 0014
7D0-09-02 2064 5400 05BF

720-03-01 6002 6C00 00F9
720-09-01 2042 1544 1905

706-01-01 0E00 0017 0236
706-02-01 2A67 0000 00A1

 

[Sofa King]

Hey! Is there any way you can help me activating the speed sign?


This are my “as is”:


7D0-05-01 0007 3000 0014
7D0-09-02 2064 5400 05BF

720-03-01 6002 6C00 00F9
720-09-01 2042 1544 1905

706-01-01 0E00 0017 0236
706-02-01 2A67 0000 00A1

Just plugging in the numbers that you quoted by @GrabThatBlue... no guarantees...

7D0-05-01 2186 3000 0014
7D0-09-02 2064 5500 0DBF

720-03-01 6102 6C00 00F9
720-09-01 2042 1544 9905

706-01-01 0E40 0017 0236
706-02-01 6A67 0000 00A1

* these will change based on changes to the line (checksum), and will be different.

 

[GrabThatBlue]

Just plugging in the numbers that you quoted by @GrabThatBlue... no guarantees...

7D0-05-01 2186 3000 0014
7D0-09-02 2064 5500 0DBF

720-03-01 6102 6C00 00F9
720-09-01 2042 1544 9905

706-01-01 0E40 0017 0236
706-02-01 6A67 0000 00A1

* these will change based on changes to the line (checksum), and will be different.

In this case it is "dangerous" to do so. TSR has a few settings which are dependent of the car specs. It might work, but you might delete or change other settings too. For this reason I stopped finding out the right changes for others because it takes me a few hours to compare and find out. This is the only change that I had difficulties with because of that reason in the beginning.

Sponsored