I don't even remember now.. Remote Start was already enabled (but via app, so i've just changed the remote keybof), I've enabled the Remote Rev, the continuous gear indicator (showing the current gear even while in "D"), and the auto-lock feature with horn chirp (door locks automatically when you leave the car sensing the keyfob); but this last one didn't hit MotorCraft AsBuilt yet (so it still stock there in the file).
I could not find the lines you asked for in the spreadsheet of livinitup. Or did I miss something?Thanks, I've what I needed (and there's no "news" unfortunately).
I was interested in the differences (if any) about the Engine Control logic and the Speed Limiting Features (SLF) between the different markets, but there isn't any.
Great, we practically have the same features on.
You were very active in the other thread about this
Ah that's right. My brain stopped working since yesterday. Worked more than 16 hours straight on coding, comparing and writing Forscan values.
I was busy all day until now that I had a chance to go to the car and pull the info. Here the 3 screenshots that covers all the lines you were asking for. Thank you.
I was busy all day until now that I had a chance to go to the car and pull the info. Here the 3 screenshots that covers all the lines you were asking for. Thank you.
I'm in Puerto Rico, a US territory so everything is just like in USA.
APIMI was busy all day until now that I had a chance to go to the car and pull the info. Here the 3 screenshots that covers all the lines you were asking for. Thank you.
Do you have any video about this performance shift? I have no idea how it looks like and what it does.Thanks again to @roket that did the trick! In case anyone in the future has the same issue easy mode in Forscan did work.
You need to select in the IPC module "Performance Shift Indicator Enabled" and
"Performance Shift Enabled"
In the APIM module you would select:
"Performance Shift Indicator Enabled"
I didn't change the Max and Min RPM values (APIM) and had no issues just like roket said.
The good news is that by doing this changes it enabled the Speed Limits Sign and the menu but I'm limited right now to test it in a normal road, Street or Highway, just inside the complex where I live that has a couple of non typical speed limit signs it didn't pick it up, but again, these signs are not the regular official ones, they are a little smaller and more for private use than official government use. So I'll need to wait until I can go out maybe tomorrow afternoon, I can't try it in the morning.
Okay cool, let's hope your car has the hardware for it to read the sign.The good news is that by doing this changes it enabled the Speed Limits Sign and the menu but I'm limited right now to test it in a normal road, Street or Highway, just inside the complex where I live that has a couple of non typical speed limit signs it didn't pick it up, but again, these signs are not the regular official ones, they are a little smaller and more for private use than official government use. So I'll need to wait until I can go out maybe tomorrow afternoon, I can't try it in the morning.
Anyways, thanks a lot for your help and patience, I'm very grateful. Just 2 things. If it doesn't work, if it never detects a sign, how can I turn it off, do you recommend me to put all the changes back as they were before or is there just a simple change that I can do for that?
Second, as you can see in the pictures I took, the sign is clearly not centered with the above info, the speedometer at least not in MPH, is this something that it's adjusted with one of those changes or is this non centered icon is a general "issue"? I know this last one sounds picky but just want to be sure that if it finally works, that it can look good also on the console.
Thank you.
