Darkhorse Handling pack aftermarket wheel options

[steedazach]

You might be biased!!!!

That setup was perfect for a non-supercharged car but the added weight in the front causes a little sag on those Steeda Sport Progressives which then cause issues with the 20" Velgens. However, the Steeda Minimum Drop MagnaRide should resolve all of that.

Should get you back right. Minimum drop from progressives should raise it about .5 ish inches I believe. Send another pic when you get them installed!

Sponsored

 

[MCS]

Should get you back right. Minimum drop from progressives should raise it about .5 ish inches I believe. Send another pic when you get them installed!

Will do. I am debating on which 20" wheels to get to go with it. I look at those Velgens and I long to get another set (+ they have awesome swag), however there are so many good choices for black and dark grey on the market. I'm even debating on spending more and getting the Apex wheels that Hammond has; they look stock HP just bigger. I must choose wisely (Indian Jones anyone?)

 

[Apex Wheels]

20" wheels look great on the newer Mustangs! Richard went with our 20x10 ET35 and 20x11 ET52, which I think paired with a 275 and 305 look great!

The Handling package is better suited for the 20x11 ET26 in the front, as it's a direct replacement for the 19x10.5 ET24 and will accept the 305/30-19 in the front as well with no mods, since the Handling Package comes with camber plates and it's already got the camber needed for the 20x11 ET26.

Let me know if you have any questions!

 

[Junkyard Dog]

Richard Hammond has these on his EU Dark Horse.

Richard Hammond and his Apex wheels are over here:
https://www.mustang7g.com/forums/th...ang-dark-horse-w-whipple-supercharger.175554/

Sponsored