2024+ Mustang GT Air Intake Filters

[fredm666]

I’m glad they made it and you got them fitted without issue! Make sure to keep the stock ones in case you need to drive while these dry after cleanings.

Thank you for your order!

Yes, I’m keeping the original filters as spares.

Sponsored

 

[GT7 Mayhem]

I’m glad they made it and you got them fitted without issue! Make sure to keep the stock ones in case you need to drive while these dry after cleanings.

Thank you for your order!

What is the procedure for cleaning these filters? I did save my paper filters for future cleaning/drying.

 

[Doug Watson]

Latest from SPE Motorsports.

https://www.spemotorsport.com/colle...rt-s650-mustang-carbon-fiber-cold-air-intakes

 

[Mastermind46]

Do you know if yours would work in another CAI system (like steeda, roush etc) or do they only work in the factory intake. I bought a pair a while ago and they work great but Im thinking of putting a new CAI on. Thx The product/filters are great hate to not be able to use them.

I do not. I would check flange dimensions. Our filters are the same as the OEM (5 inch diameter flange). As long as the aftermarket intake uses 5 inch diameter flange and have enough space for the filter, they will work. Intakes with different boxes will likely have a different size or shape filter and is unlikely to work.

I think the Steeda intake, Roush lids, and the SPE intake linked above will work but have not been able to confirm this.

The SPE intake in forge carbon fiber is on my dream list.

 

[Mastermind46]

What is the procedure for cleaning these filters? I did save my paper filters for future cleaning/drying.

Start by tapping on the filter to knock off the loose debris. Larger particulate will often fall off inside of the airbox so make sure to vacuum that out. From the inside out, use water to push out the rest of the debris from the filter. If there is any oil residue or stuck on items, use a little bit of dish soap to help remove it.

 

[james32thedge]

I do not. I would check flange dimensions. Our filters are the same as the OEM (5 inch diameter flange). As long as the aftermarket intake uses 5 inch diameter flange and have enough space for the filter, they will work. Intakes with different boxes will likely have a different size or shape filter and is unlikely to work.

I think the Steeda intake, Roush lids, and the SPE intake linked above will work but have not been able to confirm this.

The SPE intake in forge carbon fiber is on my dream list.

Thx I just ordered the twill SPE can't wait to get it. I hope I can use your filters because the intake comes with oiled filters no option for dry. I will either for when one is being cleaned.

 

[Mastermind46]

Thx I just ordered the twill SPE can't wait to get it. I hope I can use your filters because the intake comes with oiled filters no option for dry. I will either for when one is being cleaned.

Please do post up your findings. I am hopeful that they will fit but haven't been able to test this myself yet.

 

[james32thedge]

Please do post up your findings. I am hopeful that they will fit but haven't been able to test this myself yet.

Will do, Thx

 

[fredm666]

I’m glad they made it and you got them fitted without issue! Make sure to keep the stock ones in case you need to drive while these dry after cleanings.

Thank you for your order!

Quick question: are the stock Fomoco filters washable?
as I mentioned earlier one is fairly dirty

 

[dusman59]

No. Made of paper.

 

[Mastermind46]

Quick question: are the stock Fomoco filters washable?
as I mentioned earlier one is fairly dirty

Definitely not washable as stated by dusman59.

 

[fredm666]

No. Made of paper.

Thank you, I’ll keep them as they are

 

[DT-GT]

Received my filters today. They were packed well and arrived in good condition. A very well-made product. Used a little silicone lubricant on the flange to ease installation. As others indicated, it is key to loosen the clamp. They fit nicely and I look forward to seeing my mileage between cleanings and how well they hold up.

I have just over 7k miles on my 2025 and the original OEM filters were fairly dirty, so decided to change to these filters now.

Thanks for all the work on these and also providing the details which provide good insight into these and other filters. Will be making a long trip soon and will provide feedback in the future.

 

[Mastermind46]

Great news! Filters will finally be back in stock this week! I am hoping to be shipping orders by Friday. Now for the bad news, prices will need to be increased to match my increased costs.

Due to so many people reaching out asking when filters would be back in stock, we are going to keep the current price as a sale price for the next few weeks.

Please reach out to me with any questions.

 

[thornclaw]

can you give an estimate of how many miles before a cleaning is needed? i could handle 2x a year.

Sponsored