2024 Mustang FORScan List / Database / Spreadsheet (by Livinitup)

[erasat]

You can renew your 2 month Forscan license for free.

Didn't know that, I'll need to wait and see when it expires what option does it gives me.

Sponsored

 

[erasat]

725 is the module you don't have. But If I understood you correctly you are going to install this module.

Yes, but my question is that if I can turn that module on now or if I'll need to wait until I get what I'm planning to buy and install it for it to allow me to turn that on? So if I can turn that on from now or if it will pop up error messages for a module that it's turn on on code but not physically installed?

 

[GrabThatBlue]

Yes, but my question is that if I can turn that module on now or if I'll need to wait until I get what I'm planning to buy and install it for it to allow my to turn that on? So if I can turn that on from now or if it will pop up error messages for a module that it's turn on on code but not physically installed?

You need to install the module and then make your car read the module.

 

[erasat]

You need to install the module and then make your car read the module.

Ok, great, I'll buy this and wait for it to arrive according to them by early June, so almost a month to get something from the States to here, simply because they treat us as a Foreign country and not a US Territory with same shipping carriers and options, when when I've been explaining everything and requesting them to change their policy about selling and shipping to us.

 

[mabcim]

I suspect the module will just ‘show up’, in Forscan. Since these are all on the CAN bus, as the bus is scanned, they should just be there. The flag on the BCM should just be telling the BCM it can talk to the wireless charging module.

 

[GrabThatBlue]

Yes, but probably you have to make a new profile to see it show up.

 

[erasat]

Yes, but probably you have to make a new profile to see it show up.

Yes that's what I think and was planning to do, not to load the saved profile and let ForScan to create a new one after installing the new module.

 

[sky5oh]

Yeah, the module is what's included with this replacement and it connects to a pre-existing wiring, and yes, you're right, what I'll need is the ForScan code changes for it to recognize it.

That's why I'm trying to figure it out before I order this as I'm really sure I won't pay $400 for the Infotainment one even when they include everything as a plug and play kit, but for me and my little use for it, I can pay the $100 for the one I found but not $400.

Thank you.

Side note, TSR may be throwing an indefinite DTC in the background for IPMA since we do not have navigation, go into easy mode in IPMA locate “Traffic Sign Recognition Mode” you’ll probably have “3 - Fusion (map data + camera data)” enabled. If so it’s trying to pull
Map data from something that doesn’t exist, swap it to “2 - Camera Data Only” and this will resolve the DTC in IPMA.

 

[erasat]

Side note, TSR may be throwing an indefinite DTC in the background for IPMA since we do not have navigation, go into easy mode in IPMA locate “Traffic Sign Recognition Mode” you’ll probably have “3 - Fusion (map data + camera data)” enabled. If so it’s trying to pull
Map data from something that doesn’t exist, swap it to “2 - Camera Data Only” and this will resolve the DTC in IPMA.

Great, I'll check it later, thank you

 

[sky5oh]

Great, I'll check it later, thank you

No problem, lmk if it was throwing a code for you, that is when you get to check, as I’m curious.

 

[erasat]

Side note, TSR may be throwing an indefinite DTC in the background for IPMA since we do not have navigation, go into easy mode in IPMA locate “Traffic Sign Recognition Mode” you’ll probably have “3 - Fusion (map data + camera data)” enabled. If so it’s trying to pull
Map data from something that doesn’t exist, swap it to “2 - Camera Data Only” and this will resolve the DTC in IPMA.

Yes, I had the exact same DTC, so I proceeded to change the value, reset the DTC code and see again and now I just see the other one that I had and didn't see or paid attention to it before. Do you have an idea what to look for for this other one? Latest changes I did for IPC module was to enable TSR.

I just read on another thread about the same IPC DTC code someone else having the same after disabling the Seat Belt Warnings, that was the first thing I did when I got ForScan, not the warnings but the startup seatbelt screen. Just wondering if somebody else might have another theory. Thank you.

 

[A.alansari]

I also checked the airbag status lighting behaviour as well as the small icon in the dash board when unlocking/locking and all seems to be ok.
However, I used some different values which do not tell the system there are no seats at all:

IPC 720-13-01 "8xxx" "xxxx" "xx--"
IPC 720-13-02 "xx1x" "xx--"
IPC 720-14-01 "1xxx" "xxxx" "xx--"
IPC 720-14-02 "xxxx" "xx--"
(no changes to that line)

That does the job as well.

I tried this the chime is gone but the splash screen still there do you know if there something else I need to change to eliminated ?

 

[Sofa King]

I tried this the chime is gone but the splash screen still there do you know if there something else I need to change to eliminated ?

Is it unselected in the screen menu?

 

[A.alansari]

Is it unselected in the screen menu?

I can turn it off on the screen?

 

[GrabThatBlue]

I tried this the chime is gone but the splash screen still there do you know if there something else I need to change to eliminated ?

I had the same. Splash screen still there.

Sponsored