Wheel Clearance Question

[dblvenom]

Hoping someone has this setup. Seeking to install 19x10 Apex EC7 ET40 for a square setup on an PP non-magnaride GT. Installing Steeda Dual Rate springs and adjustable struts. Will I need a spacer for clearance?

Sponsored

 

[Manual Ronnie]

I would not think think so. Im running square 19x10 Steeda +37 offset and lowered on FP track springs.

 

[needforspeedirl]

Hoping someone has this setup. Seeking to install 19x10 Apex EC7 ET40 for a square setup on an PP non-magnaride GT. Installing Steeda Dual Rate springs and adjustable struts. Will I need a spacer for clearance?

I run Apex ML-10RT
Here’s my setup
F: 19x10 et 40 275/35
R: 19x11 et 52 305/35

I’m running the RTR tactical suspension that came on my spec 2 RTR.

I did not like this look so I added a 30 mm spacer to the front and a 20 mm spacer in the rear. I now have a little poke at all 4 corners with no rubbing or scrubbing.

 

[needforspeedirl]

Pics

 

[Jekyll_Hyde]

Pics

Very nice! Can u add a side shot?

 

[needforspeedirl]

Very nice! Can u add a side shot?

 

[Apex Wheels]

Hoping someone has this setup. Seeking to install 19x10 Apex EC7 ET40 for a square setup on an PP non-magnaride GT. Installing Steeda Dual Rate springs and adjustable struts. Will I need a spacer for clearance?

You won't need any spacers! Paired with a 275 or 285 would be a great fit. It's a direct bolt-on setup that should be nice and flush. A 285 gives a meaty look, while a 275 will be a little more reserved and hide under the fender better. You'll be good to lower the car as well.

Let me know if you have questions! Happy to help!

Sponsored