Sponsored
OP
OP
MidwayJ

MidwayJ

Well-Known Member
Joined
Sep 9, 2018
Threads
4
Messages
885
Reaction score
621
Location
Dallas, Texas
Vehicle(s)
2019 Mustang GT Coupe, 2013 Honda CR-V, 2009 Ford Fusion
Did you have to adjust rear camber after?
Yeah one side was -2.0 and the other was -2.5. The guy who aligned it adjusted both to -1.2.
 
OP
OP
MidwayJ

MidwayJ

Well-Known Member
Joined
Sep 9, 2018
Threads
4
Messages
885
Reaction score
621
Location
Dallas, Texas
Vehicle(s)
2019 Mustang GT Coupe, 2013 Honda CR-V, 2009 Ford Fusion
You have stock rear camber arms? It will be hard to get someone to play with those.
Yes. I have a good alignment guy. With only a 0.8" drop I wouldn't expect it to need a drastic adjustment.
 

fsk128

Member
Joined
Dec 11, 2025
Threads
1
Messages
17
Reaction score
11
Location
Argentina
Vehicle(s)
Mustang GT PP 2025
Yes. I have a good alignment guy. With only a 0.8" drop I wouldn't expect it to need a drastic adjustment.
Yes gonna look for one of those. You dont need any other parts right? Like adjustable sway bar end links or front control arms with longer studs? Steeda made some videos about needing those to correct suspension geometry when lowered and blah blah
 


OP
OP
MidwayJ

MidwayJ

Well-Known Member
Joined
Sep 9, 2018
Threads
4
Messages
885
Reaction score
621
Location
Dallas, Texas
Vehicle(s)
2019 Mustang GT Coupe, 2013 Honda CR-V, 2009 Ford Fusion
Yes gonna look for one of those. You dont need any other parts right? Like adjustable sway bar end links or front control arms with longer studs? Steeda made some videos about needing those to correct suspension geometry when lowered and blah blah
I did install camber plates in front as an abundance of caution but I'm not sure they were needed. Didn't do anything else.

I know Steeda has a bump steer kit that's supposed to correct suspension geometry for lowered cars, but I don't think it's needed unless you go with more than 1 inch of drop.
 

fsk128

Member
Joined
Dec 11, 2025
Threads
1
Messages
17
Reaction score
11
Location
Argentina
Vehicle(s)
Mustang GT PP 2025
I did install camber plates in front as an abundance of caution but I'm not sure they were needed. Didn't do anything else.

I know Steeda has a bump steer kit that's supposed to correct suspension geometry for lowered cars, but I don't think it's needed unless you go with more than 1 inch of drop.
Hey! im waiting on my magneride sport springs. Did you notice any increase in bump steer? I ordered the springs and the camber plates as you did.
 
OP
OP
MidwayJ

MidwayJ

Well-Known Member
Joined
Sep 9, 2018
Threads
4
Messages
885
Reaction score
621
Location
Dallas, Texas
Vehicle(s)
2019 Mustang GT Coupe, 2013 Honda CR-V, 2009 Ford Fusion
Hey! im waiting on my magneride sport springs. Did you notice any increase in bump steer? I ordered the springs and the camber plates as you did.
Not at all. Since the springs were installed I've driven the car spiritedly on curvy back roads, not all of them smooth, and didn't notice any bump steer issues. The ride is a little firmer in both normal and sport modes, but it's not a big difference. Normal mode actually feels better because it's more controlled. I suspect the drop is not big enough to impact the suspension geometry too much.
Sponsored

 
 








Top