Sponsored
Steeda Magneride Sport Progressive Springs installed - review & photos
OP
OP
MidwayJ
Well-Known Member
- Joined
- Sep 9, 2018
- Threads
- 4
- Messages
- 871
- Reaction score
- 605
- Location
- Dallas, Texas
- Vehicle(s)
- 2019 Mustang GT Coupe, 2013 Honda CR-V, 2009 Ford Fusion
- Thread starter
- #32
Yeah one side was -2.0 and the other was -2.5. The guy who aligned it adjusted both to -1.2.
OP
OP
MidwayJ
Well-Known Member
- Joined
- Sep 9, 2018
- Threads
- 4
- Messages
- 871
- Reaction score
- 605
- Location
- Dallas, Texas
- Vehicle(s)
- 2019 Mustang GT Coupe, 2013 Honda CR-V, 2009 Ford Fusion
- Thread starter
- #34
Yes. I have a good alignment guy. With only a 0.8" drop I wouldn't expect it to need a drastic adjustment.
fsk128
Member
Yes gonna look for one of those. You dont need any other parts right? Like adjustable sway bar end links or front control arms with longer studs? Steeda made some videos about needing those to correct suspension geometry when lowered and blah blah
OP
OP
MidwayJ
Well-Known Member
- Joined
- Sep 9, 2018
- Threads
- 4
- Messages
- 871
- Reaction score
- 605
- Location
- Dallas, Texas
- Vehicle(s)
- 2019 Mustang GT Coupe, 2013 Honda CR-V, 2009 Ford Fusion
- Thread starter
- #36
I did install camber plates in front as an abundance of caution but I'm not sure they were needed. Didn't do anything else.
I know Steeda has a bump steer kit that's supposed to correct suspension geometry for lowered cars, but I don't think it's needed unless you go with more than 1 inch of drop.
Sponsored
Similar threads
