S650 Aftermarket Sound System

[Drewmandoo]

The Fan ducts are simple, here ya go.

Sponsored

 

[ichie123]

AudioDesign in Jacksonville FL is around the corner from my house. They scanned my trunk with a 3D scanner. There is a little difference in the '24 with the fuel line, and why there is a little space in the original design pictured in his car. I also got the amp rack that they sell, and it fits in the '24. I will post in the next week when I get the subs in. I have Sundown SML 10" that are going into the new boxes. I wanted to save the trunk space and the passthrough to the back seats.

https://store.audiodesignscg.com/

You ever get that done? Interested in seeing the new design fit

 

[FriedCheese]

The Fan ducts are simple, here ya go.

Thanks but I, and I should have specified, meant the hold down/standoff bracket in the middle.

 

[Drewmandoo]

Oh that big boy, here ya go!

One thing to note, I wouldn't use PLA for it if you are in any southern area with hot temps, it will deform and make it very difficult to remove the spare tire screw.

 

[Ben Beard]

Where/ how is everyone mounting their bass knob? I am looking for a mounting solution without drilling any holes in the plastic of the dash.

 

[Drewmandoo]

Where/ how is everyone mounting their bass knob? I am looking for a mounting solution without drilling any holes in the plastic of the dash.

I have mine routed to the cubby arm rest. I fished the wires under the center console with the tweeter wires. Popped a small hole for the cable, and double sided tape sticks it to the plastic. Removable with some patience too.

 

[ichie123]

Where/ how is everyone mounting their bass knob? I am looking for a mounting solution without drilling any holes in the plastic of the dash.

I popped my cigerette lighter plug out and my knob fits where it was. I don’t use anything that requires that plug

Sponsored