roket's Dark Horse - "Azureus" Project

[roket]

As a research scientist the lack of labels on the X-axis is killing me lol

yeah, i omitted them because the engine from the simulation was not perfect, so actual numbers dont really make sense. it's more about how they perform against each other

Sponsored

 

[Jrws1014]

yeah, i omitted them because the engine from the simulation was not perfect, so actual numbers dont really make sense. it's more about how they perform against each other

I understand. Just habit lol

 

[JAL]

full disclaimer: i dont have the vehicle or wheels yet, but the offsets for the wheels i got are +24mm front, +46mm rear. i did the math and things should work out fine, but we'll see soon. i based my assumptions on the backspacing of GT350R wheels, as i love how poke looks on wheels

I see. I don't mind a bit of poke either so long as it never rubs on the fender. The pic I posted is +26mm offset, 1.75 inch lowered, 11 inch wheel with Michelin Pilot Sport 4S. I don't think I could have fitted it closer to the strut (about 4mm clearance), and I had signs it rubbed on the strut under lateral load when I track the car. Do you reckon the fitment will be identical to the s550 with the redesigned fenders?

 

[roket]

I see. I don't mind a bit of poke either so long as it never rubs on the fender. The pic I posted is +26mm offset, 1.75 inch lowered, 11 inch wheel with Michelin Pilot Sport 4S. I don't think I could have fitted it closer to the strut (about 4mm clearance), and I had signs it rubbed on the strut under lateral load when I track the car. Do you reckon the fitment will be identical to the s550 with the redesigned fenders?

i am 99.999% sure that fender and suspension geometry has not changed with the S650. i also really think the amount you lowered it had a big part on your issues. the 2015-2020 GT350R had 19X11" front wheels with +24mm offset (which is why i went with those specs, they're known to work)

 

[roket]

last update was 16:37 and it's currently 23:08. last reported in Clovis, New Mexico, going alongside the US 60/70/84 (yeah it's 3 different numbers for some reason???)

 

[roket]

been checking all day, it's still in Clovis, NM with no movement at all. if Blue Island, IL is anything to go by, it might start moving again tomorrow

 

[roket]

it's moved. in Lucy, New Mexico now, close to crossing the rio grande

 

[Sofa King]

The suspense is killing me... lol

 

[dusman59]

I hope there are some full railcars delivering here in AZ. As soon as I can drive one I will be ordering a full loaded GT.

 

[roket]

I hope there are some full railcars delivering here in AZ. As soon as I can drive one I will be ordering a full loaded GT.

you might be hard pressed to find a '24 Mustang that isn't sold. of the ones that have come in to my dealer so far, 100% have been sold orders (though, there's only been 1)

 

[roket]

@JAL i got the wheels today and test fit them on my EcoBoost. they fit great and the rear wheels have a palm's thickness of space between the rear edge and the shock. the front wheels don't hit anything, either

 

[roket]

it's in Arizona now, nearing Holbrook

 

[HWill]

it's in Arizona now, nearing Holbrook

I been waiting on you to post this. I been keeping notes of the travel too. I think it will be in El Mirage sometime tomorrow if not tonight. Most of the Mustangs they had there are gone, think there was 1 sitting and 1 on a truck. But the lot is full again so hopefully we don't get a long wait after it gets dropped off.

 

[roket]

it just left Winslow, half way to Flagstaff

 

[roket]

it's made it to ashfork. now is the final stretch!

Sponsored