Forscan for beginners?

[Sofa King]

She’s gorgeous. Appears the fender liner hole issue is resolved. Ordering the black patches for the ugly visor airbag warning sticker.

Are the fender holes covered with patches or is it a new fender liner?

Sponsored

 

[AZ_Ryan]

Are the fender holes covered with patches or is it a new fender liner?

They look like patches with a single screw. Waiting for someone to post a part number.

 

[72Skiddoo]

A

wide angle ground up drivers side. It’s attached in the center but the seam in the left puckers a bit. Looks like som black permatex is in order.

 

[GrabThatBlue]

To me it looks like a new fender liner wich is cut from below and from the side, so the machine in the factory still can acces it. And they used a single screw below to close it.

 

[72Skiddoo]

Passenger side a better fit but still a seam.

 

[roadpilot]

On the F150 forums, the spreadsheets have a tab called "Common" where all the "common" things that everybody does is listed.

Not sure why the "common" tab isn't being kept up to date on the 7G spreadsheet. @roket ??

E.g., 2021+ F150 "common" tab includes this:

 

[roket]

On the F150 forums, the spreadsheets have a tab called "Common" where all the "common" things that everybody does is listed.

Not sure why the "common" tab isn't being kept up to date on the 7G spreadsheet. @roket ??

E.g., 2021+ F150 "common" tab includes this:

Livinitup maintains the spreadsheet. all i did was ask him to make it, then post the link

 

[Paul2020]

She’s gorgeous. Appears the fender liner hole issue is resolved. Ordering the black patches for the ugly visor airbag warning sticker.

If we can stick to the title of the ‘thread’ please there are plenty of others relating to patching the hole..

Getting us back on track, if we can just note what changes you made / where you made them & any side effects.

Im ok with spreadsheets least will know the modules to check in when doing ‘ simple way’..

Thanks..

 

[72Skiddoo]

If we can stick to the title of the ‘thread’ please there are plenty of others relating to patching the hole..

Getting us back on track, if we can just note what changes you made / where you made them & any side effects.

Im ok with spreadsheets least will know the modules to check in when doing ‘ simple way’..

Thanks..

mea culpa

 

[AZ_Ryan]

I'm still waiting for someone to post step by step instruction and not a spreadsheet .

 

[DT-GT]

I found this video to be useful for me to understand Forscan basics. Not the specifics for our Mustang, but basics for using Forscan. I found it very helpful and afterwards I was able to easily change my continuous gear display in the easy method. I want to stay away from the changing of digital and hexadecimal values and just stick with things like ABLE and DISABLE. Having a spreadsheet listing those for our cars and a comment on what the changes do would be very helpful.

 

[AZ_Ryan]

I found this video to be useful for me to understand Forscan basics. Not the specifics for our Mustang, but basics for using Forscan. I found it very helpful and afterwards I was able to easily change my continuous gear display in the easy method. I want to stay away from the changing of digital and hexadecimal values and just stick with things like ABLE and DISABLE. Having a spreadsheet listing those for our cars and a comment on what the changes do would be very helpful.

So you can select enable for gear display without changing values then?

 

[DT-GT]

Yes. In the IPC module it showed the name and DISABLED. I simply clicked on it and changed to ENABLED. Now I have continuous gear display.

So you can select enable for gear display without changing values then?

 

[A.alansari]

So you can select enable for gear display without changing values then?

yes just connect forsacn then open ipc (not the as built) and you will find a lot of things you can just enable and disable

 

[AZ_Ryan]

Thanks guys. You didn't have any issues or errors afterward?

Sponsored