Anyone else get an update notice?

[rugedraw]

So anyone know if there is a way to check if software is latest version? The update I saw for a few sec that is , said it had performance upgrades or to the effect of performance something...

My FDRS license expired and I didn't renew it so I can no longer check for pending module updates. Someone with FDRS or full PTS access would be able to check with your VIN.

Sponsored

 

[D/\rK•650]

My FDRS license expired and I didn't renew it so I can no longer check for pending module updates. Someone with FDRS or full PTS access would be able to check with your VIN.

What is an FDRS license? Is that just the forscan app ?

 

[D/\rK•650]

My FDRS license expired and I didn't renew it so I can no longer check for pending module updates. Someone with FDRS or full PTS access would be able to check with your VIN.

Thank you for your help...I'll look into this maybe I can buy the license or something...

 

[D/\rK•650]

My FDRS license expired and I didn't renew it so I can no longer check for pending module updates. Someone with FDRS or full PTS access would be able to check with your VIN.

If I buy this would it read or be able to read related information
https://rotunda.service-solutions.com/en-US/Pages/ItemDetail.aspx?SKU=164-R9874 ?

 

[rugedraw]

If I buy this would it read or be able to read related information
https://rotunda.service-solutions.com/en-US/Pages/ItemDetail.aspx?SKU=164-R9874 ?

Your car being a 2025 most likely has very few pending updates. If you want to save yourself the $500, I have 4 Mongoose cables I loan out for free. I require a $500 deposit which I refund once you mail it back to me. The waiting list is very short right now. Details are below:

https://www.f150gen14.com/forum/thr...mming-vehicle-interface-lending-thread.13145/

 

[D/\rK•650]

Your car being a 2025 most likely has very few pending updates. If you want to save yourself the $500, I have 4 Mongoose cables I loan out for free. I require a $500 deposit which I refund once you mail it back to me. The waiting list is very short right now. Details are below:

https://www.f150gen14.com/forum/thr...mming-vehicle-interface-lending-thread.13145/

If i send you my vin in private direct message can you look up any information on it ? If you charge from this how much would it be? Your probably right it about it being new but im curious and love do research and look into stuff like this. Love computer tech things ect.
Thank you

 

[rugedraw]

If i send you my vin in private direct message can you look up any information on it ? If you charge from this how much would it be? Your probably right it about it being new but im curious and love do research and look into stuff like this. Love computer tech things ect.
Thank you

Yea, message me the VIN. I don't charge anything.

 

[DT-GT]

Just for comparison, as of today the ABOUT SYNC shows the following in my 2025 built in mid-March 2025. All of the information is the same as on 7-16-2025, so no update in the interim even though MyColors have done the reset a couple of times. Additionally, the UPDATES page says there is no current update.

SYNC 4, Software Version: 24277_PRODUCT
Revision: 1423

 

[Cobrakit]

So i tried to update software for pushed pcm change and it said Interrupted. Called Ford using Ford Pass and was told battery was only at 40% charge. So i put a slow charge on battery for 6 hours. Battery read 12.6 volts, but dash display said 11.5 (???). I plugged in and tried to check charge using Forscan, could not figure out how. Did a self check on battery management system and no issues. Tried to update software again and it was interrupted again. Will try to contact Ford Pass again tomorrow.

 

[D/\rK•650]

So i tried to update software for pushed pcm change and it said Interrupted. Called Ford using Ford Pass and was told battery was only at 40% charge. So i put a slow charge on battery for 6 hours. Battery read 12.6 volts, but dash display said 11.5 (???). I plugged in and tried to check charge using Forscan, could not figure out how. Did a self check on battery management system and no issues. Tried to update software again and it was interrupted again. Will try to contact Ford Pass again tomorrow.

Weird , hope Ford really fixes that battery charge issue. My voltage for the 12 volt port does not hold its power level. Wattage drops significantly after little bit charge barely charges. Not looking forward to when I get updates. Good luck Cobrakit

 

[Zig]

So i tried to update software for pushed pcm change and it said Interrupted. Called Ford using Ford Pass and was told battery was only at 40% charge. So i put a slow charge on battery for 6 hours. Battery read 12.6 volts, but dash display said 11.5 (???). I plugged in and tried to check charge using Forscan, could not figure out how. Did a self check on battery management system and no issues. Tried to update software again and it was interrupted again. Will try to contact Ford Pass again tomorrow.

How did you connect the charger? Depending upon the method the bms may need a relearn/reset.

 

[Zig]

Why doesn’t the update info stay in fordpass? Seems once you view the details it disappears.

 

[rugedraw]

So i tried to update software for pushed pcm change and it said Interrupted. Called Ford using Ford Pass and was told battery was only at 40% charge. So i put a slow charge on battery for 6 hours. Battery read 12.6 volts, but dash display said 11.5 (???). I plugged in and tried to check charge using Forscan, could not figure out how. Did a self check on battery management system and no issues. Tried to update software again and it was interrupted again. Will try to contact Ford Pass again tomorrow.

Interrupted by another process is 100% due to the 12v battery not being up to spec. It could be the state of charge, the capacity or the BMS data quality that is preventing it from going through. Message me the VIN and I can check.

 

[Cobrakit]

So i charged the battery twice and no change. I had also driven car two 20 mile trips yesterday. Then i got in car today, again it said 11.5v, battery read 12.5v. Center display came up with statment saying update complete (finally). I had to acknowlage. Then front display now says 12v. So it most have updated the PCM last night and somehow it effects voltage displayed. Also it is very sensitive to battery charge. Also, I could not figure out how to check battery charge using Forscan. Anyone know how?

Sponsored