A.alansari
Well-Known Member
i will try my best to get as much info from the guyIt would be nice to know which module(s) needs to be swapped out... may give us a clue.
Sponsored
i will try my best to get as much info from the guyIt would be nice to know which module(s) needs to be swapped out... may give us a clue.
I'm going to test this in an hour.Try 6F6-01-02 change 0100-XXXX-XXXX to 0001-XXXX-XXXX. On my car it has the first one for turn signal "deactivate at N-1" perhaps change it to "no deactivation", and DRL to "deactivate at N-1" as both "report to N-1" this may change the priority of which light is activated?
I'm going to test this in an hour.
It may require different cfg in the BCM as well... or just may not work... thinking out loud lol
Man, do I really need to get back to the car.. hahaMay be a good guess...
Can't leave your car until it's completeMan, do I really need to get back to the car.. haha
Somebody need to donate me new car batteries. I already got a DTC of a low battery because of all this testing that eats my battery away. I also drive once a week or sometimes only 1 every 2 weeks.Can't leave your car until it's complete
If you get it to work, figure out how it works on a job 1 car, I will personally deliver a battery to youSomebody need to donate me new car batteries. I already got a DTC of a low battery because of all this testing that eats my battery away. I also drive once a week or sometimes only 1 every 2 weeks.
I think you should just walk away until we find out what the guy in Saudi Arabia responds with. Until that time, I think I'm just going to buy some safety orange duct tape and tape a line across the top and just pretend they're changedUnfortunately the line Turning_Indicator_Deact_Cfg (TIDC) is for a different purpose.
This setting defines how LDCMA handles the automatic deactivation of turn indicators typically after a lane change or turn is completed.