Aftermarket OEM Active Exhaust

[Diodict]

remember the mounting hardware, you cant get all of it separate of the factory cat-back

you can only get the spring (5F264 in the picture), actuator itself (6K789 in the picture), and nuts to mount everything (HN3 in the picture). the mounting plate and bracket that the wire harness clip to cannot be gotten alone

Yes it seems like same as the actuator for s550 it only comes with the actuator and the spring but no heat protection plate and a mount. Fortunately I found that https://www.ecstuning.com/b-genuine-bmw-parts/thermal-protection/18307628041/ this will fit the actuator but no way to get the mount

Sponsored

 

[Diodict]

you will need 1X PR3Z-14A411-C and 2X PR3Z-14A411-A. i should note that if you plan to do the Dark Horse exhaust, it has different wires that connect to the actuators due to the longer distance. those ones are PR3Z-14A411-S and replace the ones ending in "A".

Thanks for the info. I don't know why but the longer wire;PR3Z-14A411-S is cheaper than PR3Z-14A411-A one shorter. So I placed order for 2* PR3Z-14A411-S, 2* PR3Z-5K245-B and 1*PR3Z-14A411-C. I will install them when they delivered and re-program without an active exhaust first to see if the actuators work or not. I will keep you posted.

 

[roket]

Thanks for the info. I don't know why but the longer wire;PR3Z-14A411-S is cheaper than PR3Z-14A411-A one shorter. So I placed order for 2* PR3Z-14A411-S, 2* PR3Z-5K245-B and 1*PR3Z-14A411-C. I will install them when they delivered and re-program without an active exhaust first to see if the actuators work or not. I will keep you posted.

we are going to get some great info with this, even if it does not end up working

 

[Diodict]

we are going to get some great info with this, even if it does not end up working

You may already know, For S550(16-23) that non-ae, installed the actuator and reprogramed it with Forscan, they got the AE features like provided by the manufacturer. I hope it works for S650 as well otherwise, at least we would learn something

 

[roket]

You may already know, For S550(16-23) that non-ae, installed the actuator and reprogramed it with Forscan, they got the AE features like provided by the manufacturer. I hope it works for S650 as well otherwise, at least we would learn something

i actually did not know that. makes the odds of this working much higher

 

[allenquanobi]

@Diodict can you keep this thread posted if you are successful in the entire installation? would be very interested to do this as a project as well and will follow the steps you take

 

[Diodict]

@Diodict can you keep this thread posted if you are successful in the entire installation? would be very interested to do this as a project as well and will follow the steps you take

I will. You can also see a post I keep updating https://www.mustang7g.com/forums/th...ust-to-a-non-ae-is-feasible-maybe-yes.160794/)

Current status of the project is that I placed an order for the parts. I heard most Ford parts are from the US so It will take some time to be delivered since I am in Canada.

 

[Diodict]

@Diodict can you keep this thread posted if you are successful in the entire installation? would be very interested to do this as a project as well and will follow the steps you take

I got good news. Please see this post https://www.mustang7g.com/forums/th...-ae-is-feasible-maybe-yes.160794/post-3273163

Sponsored