Sponsored

Refueling is difficult

Westphal

Well-Known Member
Joined
Sep 29, 2025
Threads
2
Messages
241
Reaction score
320
Location
Maryland
Vehicle(s)
2026 GT Adriatic Blue convertible, 2005 Pontiac GTO
2004-2006 Pontiac GTOs have the same problem. One solution mentioned here was turning the nozzle around so it's sideways or upside down. Mine will click off the nozzle 1-2 gallons short, so I'll just keep pumping the nozzle for a minute or so. I reset the trip computer (which also resets the amount of fuel used) every time I fill up, so I know about how much I can pump in.
Sponsored

 

OmegaDH

Well-Known Member
Joined
Apr 27, 2026
Threads
2
Messages
53
Reaction score
34
Location
Denver
Vehicle(s)
2026 Mustang Dark Horse - Shadow Black
Could be wrong. But the stop happens at the pump side of the equation. Car is the tank. Class dismissed.
 
OP
OP
mwillems

mwillems

Active Member
Joined
Aug 8, 2026
Threads
4
Messages
27
Reaction score
48
Location
Ottawa
Vehicle(s)
2026 Mustang GT convertible, standard
Could be wrong. But the stop happens at the pump side of the equation. Car is the tank. Class dismissed.
The pump stops when the fuel does not flow smoothly down to the tank, and instead it backs up. As soon as the pump detects this fuel coming back, it shuts off. And that is the way it should be. What should NOT happen is that the fuel backs up instead of flowing smoothly down the line to the tank - and that's the car side of the equation.
 

Starship Enterprise

Well-Known Member
Joined
Jun 15, 2025
Threads
9
Messages
1,229
Reaction score
1,836
Location
MD
Vehicle(s)
2025 Mustang GT Premium
Could be wrong. But the stop happens at the pump side of the equation. Car is the tank. Class dismissed.
This is our gas tank. It is commonly referred to as a "Saddle Tank".

It is closer to being 2 tanks with a hump in the middle that gas has to pass across. If there is too much back pressure from filling up too fast, the pump thinks the tank is full before the other side fills up. Some nozzles pump the gas faster than others or are more sensitive to back pressure, resulting in different experiences for everyone.

Literally a Mustang issue for decades.

Class dismissed. 🙄

S650 Mustang Refueling is difficult IMG_4234
 
Last edited:


AZ_Ryan

Well-Known Member
Joined
May 31, 2016
Threads
36
Messages
3,812
Reaction score
5,331
Location
Arizona
Vehicle(s)
2024 GT Premium
This is our gas tank. It is commonly referred to as a "Saddle Tank".

It is closer to being 2 tanks with a hump in the middle that gas has to pass across. If there is too much back pressure from filling up too fast, the pump thinks the tank is full before the other side fills up. Some nozzles pump the gas faster than others or are more sensitive to back pressure, resulting in different experiences for everyone.

Literally a Mustang issue for decades.

Class dismissed. 🙄

IMG_4234.webp
No. Sorry. I never once experienced this on my last four mustangs. Nor have any of my friends. I maybe heard about this once or twice on the S197. Never on the S550 or S650. This is NOT a common issue. And it doesn't have anything to do with the gas tanks.
 

Starship Enterprise

Well-Known Member
Joined
Jun 15, 2025
Threads
9
Messages
1,229
Reaction score
1,836
Location
MD
Vehicle(s)
2025 Mustang GT Premium
No. Sorry. I never once experienced this on my last four mustangs. Nor have any of my friends. I maybe heard about this once or twice on the S197. Never on the S550 or S650. This is NOT a common issue. And it doesn't have anything to do with the gas tanks.
Did you ever Google the issue...... because if it never happened to you and 3 other people, it doesn't exist? and it's mentioned a LOT on 7G forums.

Now if you want to debate what's a "common" problem that's a gray area, but manufacturing design issues on the vent tube, and filler neck are documented. If the car didn't have the saddle tanks, the filler neck and vent tubes would not have been an issue.

There are many individual factors that lead to one "common" issue.

Whatever, I got better things to do than argue on the interwebs. what a friggin waste of time. No one is going to be on their deathbed wishing they said just one more thing on a message board.

Mustang Refueling Problems — Causes and Fixes
Many Mustang owners, especially those with S197 (2005–2017) and some earlier models, report difficult or repeated shut‑offs during refueling. This is often linked to fuel tank venting issues and filler neck design.

Common Causes
  • Ventilation blockage: The fuel tank’s vent system must allow air to escape as fuel enters. In early models, the vent path can be obstructed by debris, a clogged hose, or a stuck vent valve S197 Mustang Forum.
  • Filler neck design: Pre‑2008 models had a filler neck that didn’t vent the driver’s side of the tank well, causing backpressure when filling the second half S197 Mustang Forum.
  • Clogged EVAP system: A blocked charcoal canister or vent hose can slow or stop fuel flow S197 Mustang Forum+1.
  • Manufacturing defect: Ford acknowledged a defect in some S197 tanks (TSB 05‑15‑12) causing slow filling, especially above 1/4 tank RepairPal.
  • Pump pressure differences: Station nozzle pressure can cause the Mustang’s fuel pump to detect backpressure and shut off Mustang7G.
Symptoms
  • Pump shuts off every few seconds or stops mid‑fill.
  • Fuel backs up into the filler neck instead of flowing smoothly to the tank Mustang7G.
  • Problem worsens when fuel level is above 1/4 tank S197 Mustang Forum.
Workarounds and Fixes
  • Turn the nozzle upside down or sideways — this can create a small gap to relieve backpressure Mustang7G.
  • Trickle fill slowly — especially when the gauge is near 1/4 tank S197 Mustang Forum.
  • Clean or replace the EVAP vent hose — check for debris, condensation, or blockages S197 Mustang Forum.
  • Replace the vent valve or charcoal canister if clogged S197 Mustang Forum.
  • Replace the filler neck hose — Ford’s TSB recommends this for affected models RepairPal.
  • Upgrade to a later‑model tank — post‑May 2008 tanks have a vented filler neck S197 Mustang Forum.
  • Empty the tank before filling — some owners avoid the problem entirely S197 Mustang Forum.
 

Sofa King

Well-Known Member
Joined
Jul 14, 2023
Threads
14
Messages
1,773
Reaction score
1,891
Location
In a VAN down by the river
Website
youtu.be
Vehicle(s)
2024 Ecoboost, Vapor Blue, HPP
Could be wrong. But the stop happens at the pump side of the equation. Car is the tank. Class dismissed.
Not necessarily... a pinched or damaged fill neck could cause this issue.
 

AZ_Ryan

Well-Known Member
Joined
May 31, 2016
Threads
36
Messages
3,812
Reaction score
5,331
Location
Arizona
Vehicle(s)
2024 GT Premium
Did you ever Google the issue...... because if it never happened to you and 3 other people, it doesn't exist? and it's mentioned a LOT on 7G forums.

Now if you want to debate what's a "common" problem that's a gray area, but manufacturing design issues on the vent tube, and filler neck are documented. If the car didn't have the saddle tanks, the filler neck and vent tubes would not have been an issue.

There are many individual factors that lead to one "common" issue.

Whatever, I got better things to do than argue on the interwebs. what a friggin waste of time. No one is going to be on their deathbed wishing they said just one more thing on a message board.

Mustang Refueling Problems — Causes and Fixes
Many Mustang owners, especially those with S197 (2005–2017) and some earlier models, report difficult or repeated shut‑offs during refueling. This is often linked to fuel tank venting issues and filler neck design.

Common Causes
  • Ventilation blockage: The fuel tank’s vent system must allow air to escape as fuel enters. In early models, the vent path can be obstructed by debris, a clogged hose, or a stuck vent valve S197 Mustang Forum.
  • Filler neck design: Pre‑2008 models had a filler neck that didn’t vent the driver’s side of the tank well, causing backpressure when filling the second half S197 Mustang Forum.
  • Clogged EVAP system: A blocked charcoal canister or vent hose can slow or stop fuel flow S197 Mustang Forum+1.
  • Manufacturing defect: Ford acknowledged a defect in some S197 tanks (TSB 05‑15‑12) causing slow filling, especially above 1/4 tank RepairPal.
  • Pump pressure differences: Station nozzle pressure can cause the Mustang’s fuel pump to detect backpressure and shut off Mustang7G.
Symptoms
  • Pump shuts off every few seconds or stops mid‑fill.
  • Fuel backs up into the filler neck instead of flowing smoothly to the tank Mustang7G.
  • Problem worsens when fuel level is above 1/4 tank S197 Mustang Forum.
Workarounds and Fixes
  • Turn the nozzle upside down or sideways — this can create a small gap to relieve backpressure Mustang7G.
  • Trickle fill slowly — especially when the gauge is near 1/4 tank S197 Mustang Forum.
  • Clean or replace the EVAP vent hose — check for debris, condensation, or blockages S197 Mustang Forum.
  • Replace the vent valve or charcoal canister if clogged S197 Mustang Forum.
  • Replace the filler neck hose — Ford’s TSB recommends this for affected models RepairPal.
  • Upgrade to a later‑model tank — post‑May 2008 tanks have a vented filler neck S197 Mustang Forum.
  • Empty the tank before filling — some owners avoid the problem entirely S197 Mustang Forum.
Im on here all the time and ive never heard of anyone else with a fueling problem. Google isnt gospel. Did you read all the posts above saying they've never had an issue? Its not just me and three other people lol.

What I dont think you realize is different states have different pump and nozzles configurations based on state law for spillage and vapor. California is notorious for its pump fueling issues requiring people to turn the nozzles sideways or upside down on certian vehicles.

What im saying is, its the pump not the car. And its definitely not the gas tank.
Sponsored

 
 








Top