Splash Shield/Mud Guard/Fender Flare to protect paint

[jnj]

Hello, did anybody installed anything to protect body paint from debris on a GT?

I was wondering if the mud guard/splash shields that fits s550 would fit, like this one:
https://www.cjponyparts.com/califor...ration-abs-set-mustang-v6-ecoboost-gt/p/MF25/

There is also the mach 1 fender flares, but they are expensive and I am not sure they will fit.
https://lmr.com/item/LRS-16268-A/ford-mustang-mach1-fender-flares-20-21


Thanks!

Sponsored

 

[unfairslide]

You posted the same link twice.

 

[jnj]

You posted the same link twice.

Fixed! Thanks for letting me know.

https://lmr.com/item/LRS-16268-A/ford-mustang-mach1-fender-flares-20-21

 

[dusman59]

I'm sure some after market splash guards will come out that will sure to fit. As far as the fender flares IMHO they will leave water and moisture trapped.

 

[Stang24]

 

[jimgt2k24]

Will these fit a 'regular' GT?

Here’s the part numbers for the dark horse rear “mud flaps” similar to the ones on the gt350

Driver side
PR3Z-61278B51B

Passenger side
PR3Z-61278B50B

 

[JediMindTrix]

Bump. Definitely curious if these splash guards will fit the GT

 

[Hoofprint]

Any update on fender guards?

 

[Sofa King]

I put the Dark Horse Handling Package fender "flares" on the rear of the Ecoboost... perfect fit.
Part numbers are:
left: PR3Z-17D943-BA
right: PR3Z-17D942-BA
(Thanks roket for part numbers)

 

[BYBO]

I put on the Jaeger Brothers one. They just snap on.

https://jaegerbrothersauto.com/products/2024-mustang-splash-guards-4-pc-set-front-and-rear.html

 

[Sofa King]

I have a set from zl-1 add ons that I have been trying out... didn't really like the way the rear ones mounted... but the fronts are simple and I got out some big scissors and started trimming them down... still working/ thinking on those in the front.

 

[jimgt2k24]

Looks good but are you sure about those part numbers? If I google them, I get bumper parts.

I put the Dark Horse Handling Package fender "flares" on the rear of the Ecoboost... perfect fit.
Part numbers are:
left: PR3Z-17D943-BA
right: PR3Z-17D942-BA
(Thanks roket for part numbers)

 

[BYBO]

I wasn't sure about those. Simply clipping on seems a bit flimsy to me. How are they doing?

So far, so good. They don’t recommend leaving them on for cash washes, but I don’t plan on using an automated wash anyways.

 

[Sofa King]

Looks good but are you sure about those part numbers? If I google them, I get bumper parts.

Yes, those are the part numbers (courtesy of roket)... yeah, the description is misleading.

 

[Woobar]

Any update on fender guards?

Installed the ZL1 splashguards mentioned earlier in the thread. Only option I found at the time and wanted them on before I drove too much. I did not like the rear install as you have to apply a small rubber block to the inside of the fender at the top of the guard. The first one I tried to apply did not stick and I had to use an adhesive to get the block to stick. Other side stuck fine. Overall I am happy with them, but have not had the car out much due to the cindered roads living in the North East.

Sponsored