Using 2X4 instead of jacking rails

[Bear376]

Use something like this jacking pad. They make them for both floor jacks and jack stands. And they last for a long time without wear.

Sponsored

 

[tankcj]

If you just want to get the front end up….go with ramps.

 

[LouG]

Circular saw would work as well. For those without a router.

True, unless you're like me - cut once, F it up, give up.

 

[MustangMitch69]

I thought I read about some people using a 2X4 under the rocker panel to jack up each side of the car instead of installing jacking rails, but I can't find the posts. Would this work with a convertible? I've done this with other cars as I have a nice oak 2X4 that is very solid.

I got jacking rails for my vert but not for actually jacking, rather for suspension/chassis improvement. I actually installed the sides of an LED underglow kit right on top of the jacking rails, and here are some images of the most recent actual jacking points.

Steeda seemed to accidentally pinch my LED strips when they jacked up the car last time which is why I had to re-order and re-install 2 more side LED strips.

Sponsored