Sponsored

Steeda claims it, is it real world?

ZXMustang

Well-Known Member
Joined
Oct 24, 2020
Threads
9
Messages
733
Reaction score
1,022
Location
tooner
Vehicle(s)
2026 Roush Phase 2 Mustang GT - Custom tuned
Thats really disappointing. No wonder so many DH owners get salty when this comes up. I still maintain the only reason to get a DH is for the Tremec.
To me I LOVE the DH look and for the manual guys yes the tremec is a big win. But $20k+ more worth it? No way. There are a few other slight differences as well, but the DH still suffers from heat issues on track so even if you were a track rat, then you are still getting the short end of the stick here.
Sponsored

 

ZXMustang

Well-Known Member
Joined
Oct 24, 2020
Threads
9
Messages
733
Reaction score
1,022
Location
tooner
Vehicle(s)
2026 Roush Phase 2 Mustang GT - Custom tuned
Funny tho, when I compare the 23 GT and Mach 1 from the S550 gen, the mach has quite a bit more in the cal compared to the GT. Throttle body opens more, spark changes, modeled airflow differences. The mach 1 from last gen is like a GT with their FRPP performance pack. With the CAI and FRPP cal. I see GTs with that performance pack installed and their cals are identical to the OEM mach 1 cals. At least ford did something with those.
 

robvas

Well-Known Member
Joined
Mar 7, 2024
Threads
27
Messages
2,891
Reaction score
2,861
Location
MI
Vehicle(s)
2011 Mustang
Yes. But I think all gen 4 coyotes have forged cranks IIRC.
All Coyotes have forged cranks.

According to the information, the GT has a Billet Crank, not forged. The Darkhorse is forged.
What information is that? The GT doesn't have a billet crank. Those would cost ten times as much as the OEM forged crank. They wouldn't stick them in a production GT.

I've seem something where Ford called the connecting rods sinter-forged, specifically in the GT500 and I know they say they're the same for the DH.
I believe the Gen 4 Coyote is still using the same rods from the Boss 302 engine, gen 2 coyote, and gen 3 coyote. They are powdered metal or sinter-forged.

The DH and GT500/DHSC have a different rod, but it's still powdered metal or sinter-forged

They aren't what people typically thing of when they say forged rod (insert picture of a Manley H beam rod here), but guys have made 1,200-1,300hp with the stock block on those GT500's.
 

AZ_Ryan

Well-Known Member
Joined
May 31, 2016
Threads
35
Messages
3,732
Reaction score
5,192
Location
Arizona
Vehicle(s)
2024 GT Premium
To me I LOVE the DH look and for the manual guys yes the tremec is a big win. But $20k+ more worth it? No way. There are a few other slight differences as well, but the DH still suffers from heat issues on track so even if you were a track rat, then you are still getting the short end of the stick here.
Well, there isnt a 20k difference. At least not from an optioned out GT PP. Especially now with all the deals to be had.
 

ZXMustang

Well-Known Member
Joined
Oct 24, 2020
Threads
9
Messages
733
Reaction score
1,022
Location
tooner
Vehicle(s)
2026 Roush Phase 2 Mustang GT - Custom tuned
Well, there isnt a 20k difference. At least not from an optioned out GT PP. Especially now with all the deals to be had.
Thats true in terms of straight money from GTPP to DH. Maybe back when the DH was commanding a premium over sticker. But nowadays yes you can get DHs for invoice.
Sponsored

 
 








Top