Sponsored

Ford Says It Makes 500 hp, Four Different Dynos Give Four Different Results



D/\rK•650

Well-Known Member
Joined
Aug 8, 2025
Threads
20
Messages
907
Reaction score
677
Location
California
Vehicle(s)
2025 Mustang DarkHorse
The motor I'd bet makes 500hp. It has to be in Fords performance engine cradle. Then absolutely it is 500hp motor. 🤔. All motors can vary alot based on lots of variables. Right?
 

Neggytive

Well-Known Member
Joined
Mar 17, 2024
Threads
8
Messages
834
Reaction score
1,018
Location
Florida
Vehicle(s)
2024 GT Prem. convert. 401A 10 speed auto
Dyno's measure torque, the HP number is extrapolated, and different machines have different smoothing corrections added on.

They are a great tool to do timing as in add timing until the torque gains stop then back it off a degree or two, or looking at A/F ratios which is why it is said time for torque, jet for HP.

But for comparing different engines against each other it is a crap shoot

There have been guys on TV ( Engine Power, Engine Masters) who have built identical engines and run them as close to same conditions as possible ( oil temp, water temp, density altitude, etc etc etc) and never gotten the 2 engines to give the same data

If you get the same data,for one engine within the range of variance / tolerance of the machine you are doing good. When you can replicate the data it is considered valid

Getting 2 or more engines to come out the same on any given dyno is unlikely IMHO
 

135Hoser

Well-Known Member
Joined
Feb 20, 2020
Threads
12
Messages
243
Reaction score
271
Location
Canada
Vehicle(s)
2024 Dorkhorse, 2024 CR-V
Stupid click bait headline with the actual truth half way through the article after a dozen ads, that dynos are only useful to measure a gain after modifications are made assuming you have a baseline.
 
 








Top