Assist from 60th owners needed

[Sig Oris]

CLIFF NOTE VERSION

my 60th, #807, is missing its rear air deflector. If you go to the rear, lay on the ground, shimmie under trunk, look up, hopefully you’ll see a BLACK cover secured with a bunch of 7mm nut size bolts. I think a 10mm nut size bolt in the center

parts bubba at dealership says ALL 60ths were shipped without this cover. I’ve already received one member photo that shows it’s installed. I’d enjoy going back to him and say, I asked a question on a Mustang forum and X number of 60th owners responded with photos or verbal confirmation.

if you can help we cover part number that would be greatly appreciatedj

last eight of VIN: S5113338

Sponsored

 

[DarkHorsePremium]

@Sig Oris,
You should include a link to your other thread for continuity.

https://www.mustang7g.com/forums/th...-an-oem-part-rear-splash-shield-parts.176503/

What is your reluctance to calling a dealer and providing your VIN? If your car didn't come with the piece and you want one, order it. The shield is about $72 and the hardware is another $10 bucks.

If your car was supposed to come with it and didn't you'll need to work with the selling dealer. Either way, there should be no reason why you can't get this shield for your car if you want one. The holes are there.

 

[Sig Oris]

@Sig Oris,
You should include a link to your other thread for continuity.

https://www.mustang7g.com/forums/th...-an-oem-part-rear-splash-shield-parts.176503/

What is your reluctance to calling a dealer and providing your VIN? If your car didn't come with the piece and you want one, order it. The shield is about $72 and the hardware is another $10 bucks.

If your car was supposed to come with it and didn't you'll need to work with the selling dealer. Either way, there should be no reason why you can't get this shield for your car if you want one. The holes are there.

Ok, as I’ve stated, I contacted the dealer, the parts bubba position is no 60th shipped with these install. I have one confirmation so far a 60th shipped with it.

does that finally clear things up???

 

[DarkHorsePremium]

@Sig Oris,
I guess so for the most part.

But you're asking people to provide the part numbers as well as whether or not their vehicle came with the part. I think we got the part numbers taken care of in your last thread. Note however that you can't verify anything with a partial VIN and there's no need for you to post yours here. That's between you and a dealer.

All you need now is for a few more 60th owners to confirm that their car came with the with the shield.

If you want the shield, it'll cost you about a hundred bucks. Shield and hardware. 10 min to install and you're on your way. I hope you get the information you're looking for.

 

[Sig Oris]

@Sig Oris,
I guess so for the most part.

But you're asking people to provide the part numbers as well as whether or not their vehicle came with the part. I think we got the part numbers taken care of in your last thread. Note however that you can't verify anything with a partial VIN and there's no need for you to post yours here. That's between you and a dealer.

All you need now is for a few more 60th owners to confirm that their car came with the with the shield.

If you want the shield, it'll cost you about a hundred bucks. Shield and hardware. 10 min to install and you're on your way. I hope you get the information you're looking for.

how about doing me a favor and stop replying to this post as you're providing nothing of value to me

 

[D/\rK•650]

how about doing me a favor and stop replying to this post as you're providing nothing of value to me

Whoa dude DarkHorsePremium was just trying to be helpful. If you dont want any response to your posts dont post them.

 

[Sofa King]

how about doing me a favor and stop replying to this post as you're providing nothing of value to me

So, you are only looking for confirmation if installed from other 60th anniversary owners? Correct? The part number was provided in another thread... or was that not enough? ALL the parts are called out on the interactive image here.

 

[GrabThatBlue]

1. You created 2 exact same topics in 2 days
2. Today you asked for the part number while they already gave it to you in your first topic.
3. You act rude to the person who tried to help you.

Holy cow.

 

[Tripower]

Confirmed that my 60th has the pan. All 60th's are regular GTs other than badges, wheels, and maybe exclusive color, so don't know why any 60th version would not have the pan.

 

[Sig Oris]

Whoa dude DarkHorsePremium was just trying to be helpful. If you dont want any response to your posts dont post them.

i read many posts that I had nothing constructive to add so I went on to the next post

 

[D/\rK•650]

i read many posts that I had nothing constructive to add so I went on to the next post

Understood, but you dont have to reply if its not "constructive" to you. Forum Members are just trying to be helpful as im sure you can figure. Hope you got the information you wanted. Cheers

 

[Sig Oris]

Confirmed that my 60th has the pan. All 60th's are regular GTs other than badges, wheels, and maybe exclusive color, so don't know why any 60th version would not have the pan.

Thank You

Understood, but you dont have to reply if its not "constructive" to you. Forum Members are just trying to be helpful as im sure you can figure. Hope you got the information you wanted. Cheers

I was providing feedback to an individual who continued to reply with useless information. I'm a direct and to the point person. My wife knows better to ask me " does this dress make me look fat "

I'm done with discussing this as I do not wish to be BANNED.

 

[turtletim]

My car came with it installed #1428.

 

[Sig Oris]

My car came with it installed #1428.

THANK YOU

Sponsored