2024 Mustang FORScan List / Database / Spreadsheet (by Livinitup)

[drwalker887]

Mine is a straight forward 300A.
10spd, 3.55,
Build date 10/24

Sponsored

 

[erasat]

Mine is a straight forward 300A.
10spd, 3.55,
Build date 10/24

Well, then it makes less sense that mine doesn't work. The only difference is that my signs are in Spanish, but it was told here that making those code changes has worked reading Arabic signs. I'm really frustrated. Thank you.

 

[GrabThatBlue]

Well, then it makes less sense that mine doesn't work. The only difference is that my signs are in Spanish, but it was told here that making those code changes has worked reading Arabic signs. I'm really frustrated. Thank you.

Try printing out the american sign and see if that would be recognized by your car. If so, the spanish sign might still be the issue.

 

[allenouo]

My Australia model has the Adaptive Cruise Control but doesn't have the predictive speed assist and tolerance setting. I've tried enabling the PSA in APIM but no effect.

I'm sure this can be enabled via ForScan? I've attached my As-Built. Thanks in advance.

 

[allenouo]

@sky5oh and others who are interested.

Alright, I figured the most important thing out.
So it seems that Ford has hidden the CCM module for some vehicles and there is a way to make the CCM module visible. There is still a chance that your vehicle does not have the CCM module, if so, I'm sorry, bad luck. Are you in the category with a hidden CCM module, this is your lucky day.

These values are specific for Sky50h, but for people who also want to enable ACC and TRS, you might copy these values as well and see if ACC and TSR work. If it works, change it back to factory settings as there might be other values you have changed wich are not for your car and let me know, so I can give you the right values for your car to avoid errors. If it didn't work, your car doesn't have CCM and probably also not the hardware to make this work.

Here we go.

READ CAREFULLY - IMPORTANT

Make all of the changes as listed below except the CCM portion! Your car will not recognize the CCM yet. Once you have completed all of the changes, disconnect FORScan from your car and cycle your car's power. Plug back into FORScan but when it prompts you if you want to use an existing profile, select no. You will need to create a new profile as this will scan the car for all of the new changes/modules and will find your CCM.

Once your CCM is discovered, complete the CCM values as listed below.
Go to the wrench icon and reboot all modules you changed values in 1 by 1.
Once this is complete, run the CCM calibration (driving around in traffic for 5-10 minutes).

Once this is complete, go park your car, shut it off, and walk away for about half an hour.

After this, connect to Forscan, check for DTC's, clear them and then it's time to test all the new features you enabled. Goodluck.

Credits to superfordman from the F150 forum!

ACC and TSR
ABS
760-03-01	0201 0305 01--
APIM
7D0-05-01	2186 3000 00--
7D0-09-01	6313 4B28 FA--
7D0-09-02	006E 5700 0D--
7D0-09-04	9241 0000 E0--
7D0-09-05	0030 0520 20--
BCM
726-16-01	C110 8090 60--
IPMA
706-01-01	8E58 0017 00--
706-02-01	6A67 0000 00--
706-02-02	0050 0000 02--
706-05-01	0C00 0000 00--
706-16-01	120B 0000 00--
IPC
720-01-01	8F48 2C64 D2--
720-01-02	CE17 80--
720-03-01	6502 6C00 00--
720-03-02	D808 00--
720-09-01	2042 1544 99--
720-09-02	2008 21--
720-10-01	3108 0001 00--
PSCM
730-02-02	FFFF FFFF 00--
730-02-03	FF00 0000 00--
CCM
706-19-01	3146 4136 50--
706-19-02	3843 4633 52--
706-19-03	3534 3238 37--
706-19-04	3533 --

Update:
There are no CCM's hidden. If you can't see your CCM in Forscan, than you don't have the module to enable ACC. The procedure I described to reveal the CCM in Forscan is only for people who bought the CCM module and installed it on your car.

We now know that the non Premium guys don't have acces to this. But now I'm curious if the Premium guys without the 401A, can enable the 401A features. Let me know if you are a Premium without the 401A.

I have compared mine with these. I believe to enable Intelligent ACC I have to do these:

1. Turn on MFCIACC on 706-01-01.
2. Turn on FCIACCM Preview+CurveControl on 706-02-02.
3. Turn on IACC and PSA in APIM.
4. Turn on IACC in IPC.

My car came with the TSR, but I noticed a difference that on
720-03-01, the TSRIOD is disabled on my car. Does anyone know what this does?

Despite Australia using a red circle speed sign, the car shows an empty white rectangle USA-style speed sign on the screen when it hasn't detected a speed sign.

 

[GrabThatBlue]

I have compared mine with these. I believe to enable Intelligent ACC I have to do these:

1. Turn on MFCIACC on 706-01-01.
2. Turn on FCIACCM Preview+CurveControl on 706-02-02.
3. Turn on IACC and PSA in APIM.
4. Turn on IACC in IPC.

My car came with the TSR, but I noticed a difference that on
720-03-01, the TSRIOD is disabled on my car. Does anyone know what this does?

Despite Australia using a red circle speed sign, the car shows an empty white rectangle USA-style speed sign on the screen when it hasn't detected a speed sign.

Changing the empty speed sign from NA to rest of world is this..

IPC 720-10-01 x*xx xxxx xx--

Change the value to (5)

 

[allenouo]

Changing the empty speed sign from NA to rest of world is this..

IPC 720-10-01 x*xx xxxx xx--

Change the value to (5)

Thanks! I will give it a go

 

[GrabThatBlue]

Thanks! I will give it a go

But since you are trying to copy the values from NA, you need more specific region changes. I will look this up later when I'm home.


Update:

APIM:
7D0-05-01 2x8x xxxx xx--
7D0-09-02 xxxx x7xx xD--
7D0-09-04 xxxx xxxx Ex--

IPC:
720-03-01 x1xx xxxx xx--
720-03-02 xx8x xxx xx--
720-07-01 xxxx x1xx xx--
720-09-01 xxxx xxxx 9x--
720-10-01 x5xx xxxx xx--

IPMA:
706-01-01 xx4x xxxx xx--
706-02-01 6Axx xxxx xx--

Let me know what numbers you have on the numbers that I made bold.

 

[erasat]

Try printing out the american sign and see if that would be recognized by your car. If so, the spanish sign might still be the issue.

Definitely is something else and not because of the camera or sensor because they seem to be working with the Lane Keep Assistant aid, it detects when I'm moving from the center of the Lane and adjust it.

So with everything else being equal and even with other 300A group owners having this working the only difference so far that I can see is that my local speed signs with NA forms are in Spanish while most or all of you have them in English.

 

[GrabThatBlue]

Definitely is something else and not because of the camera or sensor because they seem to be working with the Lane Keep Assistant aid, it detects when I'm moving from the center of the Lane and adjust it.

So with everything else being equal and even with other 300A group owners having this working the only difference so far that I can see is that my local speed signs with NA forms are in Spanish while most or all of you have them in English.

Yep, could be.

 

[erasat]

I knew it was a long shot but I changed my Language Settings to Spanish thinking that will tell something in the code to read the signs in Spanish, but it doesn't help either, so the only other thing I could think of is changing the region somewhere using ForScan.

I'm thinking that by maybe having USA specs and Region by default it's expecting to read signs in English, unless the code allows to read in both English or Spanish but I highly doubt that, all official sugns in US are in English. Maybe by changing Region it may force this to read in the language default in that Region, so basically changing to Mexico or if by any chance Puerto Rico appears there.

I'm not a guy who gives up easily but this has challenged me to keep finding the solution but after so many tries and everybody else having this working changing the same lines of code, are beginning to take its toll on me.

 

[GrabThatBlue]

I knew it was a long shot but I changed my Language Settings to Spanish thinking that will tell something in the code to read the signs in Spanish, but it doesn't help either, so the only other thing I could think of is changing the region somewhere using ForScan.

I'm thinking that by maybe having USA specs and Region by default it's expecting to read signs in English, unless the code allows to read in both English or Spanish but I highly doubt that, all official sugns in US are in English. Maybe by changing Region it may force this to read in the language default in that Region, so basically changing to Mexico or if by any chance Puerto Rico appears there.

I'm not a guy who gives up easily but this has challenged me to keep finding the solution but after so many tries and everybody else having this working changing the same lines of code, are beginning to take its toll on me.

Changing region for Traffic Signs only knows 2.
NA and Rest of World.

 

[erasat]

Changing region for Traffic Signs only knows 2.
NA and Rest of World.

I was thinking changing Region in General not just for Traffic Signs. I know for sure changing Regions affects Apps and Sirius XM and things like that, but I don't use or need any other app other Android Auto and don't have Satellite Radio so for me it worth the shot, worst case scenario I can always revert back to default.

 

[GrabThatBlue]

I was thinking changing Region in General not just for Traffic Signs. I know for sure changing Regions affects Apps and Sirius XM and things like that, but I don't use it need any other app other Android Auto and don't have Satellite Radio so for me it worth the shot, worst case scenario I can always revert back to default.

Yes, you can change regions in general, but it will not make your traffic sign to work.

 

[erasat]

Yes, you can change regions in general, but it will not make your traffic sign to work.

What is your theory about me being the only one who haven't put this to work?

At first I thought it was the non premium card didn't have the hardware for it, then I thought that maybe just the 301A group models at least have the hardware connected, but then it was confirmed that another 300A group model by changing the same code lines was able to put it to work and I basically don't have another answer than just maybe it's the traffic signs language, hence why by following that logic I thought that it may force the camera to read Spanish words, this knowing that as you mentioned already, other people have used the same code changes and read Arabic signs.

Like I posted earlier, I'm beginning to question myself if this really worth the hassle, trouble and time that I've dedicated to make it to work, the only think that keeps me trying is the challenge of it.

Sponsored