Sponsored

Whipple intake tube “Supercharged” vinyl letters

86pagt

Well-Known Member
Joined
Aug 29, 2019
Threads
15
Messages
341
Reaction score
241
Location
Virginia
Vehicle(s)
2019 Ford Mustang GT
I’m fortunate enough to be close to the company Anchor Room and they now have vinyl letters for the intake tube. Below is a quick look not installed. Check out their website, great company and these look great.
S650 Mustang Whipple intake tube “Supercharged” vinyl letters IMG_2676
Sponsored

 
Last edited:
OP
OP
86pagt

86pagt

Well-Known Member
Joined
Aug 29, 2019
Threads
15
Messages
341
Reaction score
241
Location
Virginia
Vehicle(s)
2019 Ford Mustang GT
Decided to go do something different. The grey looked good. Since it’s hard to match Vapor blue I decided to go with a flag theme to go with the Ford Performance plates.
S650 Mustang Whipple intake tube “Supercharged” vinyl letters IMG_5156
S650 Mustang Whipple intake tube “Supercharged” vinyl letters IMG_5157
 

Racer57

Member
Joined
May 14, 2026
Threads
3
Messages
22
Reaction score
47
Location
Illinois
Vehicle(s)
2025 Shelby GT350
i received mine today.

Did yours come like this ?
can't believe they don't tell customers they have to pick each letter off and place it !

S650 Mustang Whipple intake tube “Supercharged” vinyl letters super
 
OP
OP
86pagt

86pagt

Well-Known Member
Joined
Aug 29, 2019
Threads
15
Messages
341
Reaction score
241
Location
Virginia
Vehicle(s)
2019 Ford Mustang GT
Yes no transfer tape… I used the cheapest clear tape. Actually packing tape and put it over each letter.. Don’t press super hard on the tape. Just enough to have the letter stick to it..then since you have the clear tape you can see where to place the letter. Lightly press to stick the letter to the tube. To remove the clear tape start at the edge of the letter and slowly pull the clear tape off while holding the exposed letter… this was the best method that worked for me… or you could use tweezers and place each letter on..
 


Dark Sprite

Well-Known Member
Joined
Jan 13, 2026
Threads
7
Messages
219
Reaction score
213
Location
UAE
Vehicle(s)
Vapour Blue MCP7125 700A DH (non-HP)
i received mine today.

Did yours come like this ?
can't believe they don't tell customers they have to pick each letter off and place it !

super.webp
Interested to know how you could possibly think it would be a one-piece sticker when each letter on the intake tube is in a separate hole…?
 
OP
OP
86pagt

86pagt

Well-Known Member
Joined
Aug 29, 2019
Threads
15
Messages
341
Reaction score
241
Location
Virginia
Vehicle(s)
2019 Ford Mustang GT
It’s not one piece each letter is separate on the backing paper. This might help you out

 

Ninjak

Posting from the Shadows
Joined
Aug 19, 2013
Threads
1
Messages
1,284
Reaction score
183
Location
The Shadows
Vehicle(s)
2024 Dark Horse 2024 Bronco Raptor 68 GTA
I have just done this to my intake tube. Wear a rubber glove (surgical-style latex glove) on your off hand, and use your non-gloved hand to guide. The letter will not stick to the glove the way it can stick to your fingers.

Take your time, lightly place and make sure it where you want to be. I used a plastic pry tool to press into place. Once it was all done, I used my heat gun on low to make sure they adhered.

Pic below. I also did the MUSTANG. That was super easy.

S650 Mustang Whipple intake tube “Supercharged” vinyl letters 1781913442980-25


S650 Mustang Whipple intake tube “Supercharged” vinyl letters 1781913475180-fj
Sponsored

 
 








Top