Whipple intake tube “Supercharged” vinyl letters

[86pagt]

I’m fortunate enough to be close to the company Anchor Room and they now have vinyl letters for the intake tube. Below is a quick look not installed. Check out their website, great company and these look great.

Sponsored

 

[86pagt]

Installed

 

[86pagt]

Decided to go do something different. The grey looked good. Since it’s hard to match Vapor blue I decided to go with a flag theme to go with the Ford Performance plates.

 

[Racer57]

i received mine today.

Did yours come like this ?
can't believe they don't tell customers they have to pick each letter off and place it !

 

[86pagt]

Yes no transfer tape… I used the cheapest clear tape. Actually packing tape and put it over each letter.. Don’t press super hard on the tape. Just enough to have the letter stick to it..then since you have the clear tape you can see where to place the letter. Lightly press to stick the letter to the tube. To remove the clear tape start at the edge of the letter and slowly pull the clear tape off while holding the exposed letter… this was the best method that worked for me… or you could use tweezers and place each letter on..

Sponsored