New record 24 GT runs 10's na

[John boschma]

Quickest and fastest 24GT with factory tune, stock convertor On pump gas.
2024 Mustang GT.
Stock tune
Pump gas 93
10 speed
Stock convertor
3.55 gear
RC Components wheels
Mickey Thompson tires
Aerospace Components Inc. Drag brakes
Steeda springs
Carbon fiber drive shaft
2M fabrication headers
Herfurth Aluminum Racing Mufflers
K&N air filters
Anti gravity battery
Misc. Weight loss car weighs #3240
Ran a 10.94@126 today

Sponsored

 

[Dub347sbf]

That's a great time on factory converter. I am assuming the car is gutted? What is the rear gear on this one?

Can't wait for tunes, these are going to be monsters.

 

[John boschma]

That's a great time on factory converter. I am assuming the car is gutted? What is the rear gear on this one?

Can't wait for tunes, these are going to be monsters.

Drive train is completely stock with 3.55 gear.
Only the back seat is removed.

 

[Vapor Blue GT]

Yes, there is some weight reduction done to this car. I think I saw somewhere that it weighs in around 3400lbs. I’ll try and find it today. Steeda has run 128mph in the quarter on pump gas. They’ve also put at least $20,000 in aftermarket parts.

What is the red mustang you tuber name?

 

[Mazman]

Quickest and fastest 24GT with factory tune, stock convertor On pump gas.

what else is done apart from rear seat delete and drag radials? Drag brake setup? headers? ...
Great and consistent times and speeds

 

[John boschma]

Yes, there is some weight reduction done to this car. I think I saw somewhere that it weighs in around 3400lbs. I’ll try and find it today. Steeda has run 128mph in the quarter on pump gas. They’ve also put at least $20,000 in aftermarket parts.

What is the red mustang you tuber name?

I'm not a you tuber, the car weighs 3240.
Steeda hasn't run 128 on pump gas. In fact I don't think Scott has ever run 128 in their car yet.
Scott and I have take quite a bit and try to help each other out with what the car likes and don't like.

 

[John boschma]

what else is done apart from rear seat delete and drag radials? Drag brake setup? headers? ...
Great and consistent times and speeds

I updated the original post with mods and weight

 

[Mazman]

I updated the original post with mods and weight

what do you reckon it would run without the brakes, smaller front tire/wheel, driveshaft, headers. 11.4-5?

 

[John boschma]

what do you reckon it would run without the brakes, smaller front tire/wheel, driveshaft, headers. 11.4-5?

Probably 11.90 maybe 11.80

 

[Mazman]

Probably 11.90 maybe 11.80

Ok it makes that much of a difference

 

[Q6543]

Any complaints on the 2M headers fitment or install?

getting ready to order a set and was looking at kooks and LTH… 2M seem almost too good to be true cost wise.

 

[John boschma]

Any complaints on the 2M headers fitment or install?

getting ready to order a set and was looking at kooks and LTH… 2M seem almost too good to be true cost wise.

I've used them on several of my own cars and customer cars, and they work just fine. The quality is as good as the other brands. And they make the same power.

 

[highvoltage]

Are the headers catted or non?

 

[John boschma]

Are the headers catted or non?

Mine are not catted

 

[Vapor Blue GT]

I'm not a you tuber, the car weighs 3240.
Steeda hasn't run 128 on pump gas. In fact I don't think Scott has ever run 128 in their car yet.
Scott and I have take quite a bit and try to help each other out with what the car likes and don't like.

Oh, someone at the track you ran at must have posted it. I saw the run on YouTube.

Whoever is talking in the 10second Steeda video shows a 127.92 on gas and that guy mentions that they ran 128 the week before. I wonder what they were running if it wasn’t pump gas? Do they or you have a E85 runs yet? I thought you needed a tune to run E 85 in a coyote? Do you not? Sorry, it’s my first coyote so I’m trying to learn as much as I can.

Sponsored