Keep speed warning and lane assist setting after next engine start

[Fruitstang]

I understand that @Quarktasche wants to keep the warning but add a tolerance to it so chimes don't go off at 1 kph above the limit.

Would love to have this working for the adaptive cruise control as well.

Best way for EU configuration for toggling warning chimes on/off is what I wrote in the initial post.

Sponsored

 

[rugedraw]

I understand that @Quarktasche wants to keep the warning but add a tolerance to it so chimes don't go off at 1 kph above the limit.

Would love to have this working for the adaptive cruise control as well.

Best way for EU configuration for toggling warning chimes on/off is what I wrote in the initial post.

AFAIK, the only tolerances you can configure is for intelligent adaptive cruise and predictive speed assist/curve control on vehicles that have it available.

 

[Quarktasche]

so I just made it toggleable, didnt bother with the trying to tune it. good work @Fruitstang

concerning the missing tolerances: as I'm aware tolerances are totally fine and many vendors offer more relaxed modes. even speed cameras have tolerances ffs. wild that out of all cars mustang drivers are forced to drive like grannies and hump the speed limit

Sponsored