FORScan help with A10 gear indicator

[s650cecola]

It's already on the bottom of your screen bud.

No I’m talking about on the actual screen bud, it says “N” or “R” where the gear display would be. I attached an image to show what I’m talking about.

Sponsored

 

[AZ_Ryan]

No I’m talking about on the actual screen bud, it says “N” or “R” where the gear display would be. I attached an image to show what I’m talking about.

That's only on manual transmission cars. Autos already have it at the bottom of the sceen where I circled. This does not change when you enable continuous gear display.

 

[GrabThatBlue]

No I’m talking about on the actual screen bud, it says “N” or “R” where the gear display would be. I attached an image to show what I’m talking about.

That's a nice find. It should be changable in Forscan, also on the automatic. Only need to find the right adress.

 

[Will2]

I made this change and am really happy with it. Helps me understand what the car is doing and when it's shifting, so I know to correlate what I feel with the transmission actions to better detect any issues. Wish I had done it sooner.

 

[AZ_Ryan]

I made this change and am really happy with it. Helps me understand what the car is doing and when it's shifting, so I know to correlate what I feel with the transmission actions to better detect any issues. Wish I had done it sooner.

Well said. It helps me understand what its going to do under different throttle inputs.

Ive also noticed that when you use the paddles, it holds that gear for exactly 5 seconds before going back to auto.

 

[ZXMustang]

I enable all this in my tunes, along with killing auto start stop and a few other nice to haves.

 

[2016-Ford-Mustang]

Hi, dont mind the user name as I am known as WolfMxbee on the mustang 6g forums but guess i had an old account and it doesnt transfer over, anyways I am doing a S650 dash swap and got the cluster to work perfectly with the exception of the stupid PRNDL displaying, I have a manual and seen that lines 720-02-01 affect the PRNDL, what coding would delete this?

 

[Higor]

It is possible to enable this. “Performance Shift” and “Performance Shift Indicator” both need to be enabled in FORScan in both the APIM and IPC modules. After that you need to configure it in the Track Apps for your specific drive mode. It will then show up when you put your shifter into “M” mode.

If it’s not showing up in your track apps, just triple check all your FORScan edits

It is possible to enable this. “Performance Shift” and “Performance Shift Indicator” both need to be enabled in FORScan in both the APIM and IPC modules. After that you need to configure it in the Track Apps for your specific drive mode. It will then show up when you put your shifter into “M” mode.

If it’s not showing up in your track apps, just triple check all your FORScan edits

for some reason it worked, but it disappeared on the track app every time that I turn off my car and then I need to do the whole FORScan thing again

Sponsored