We are running an aggressive setup of 11/11.5 or non aggressive which is 10/11 are you looking for 19'' or 20''?Just wondering if anyone knows what the offset is on the Dark Horse Handling Pack wheels? Lookin to get some aftermarket wheels so i would like a reference. cant find it anywhere.
thank you!
we can do 20x10 all aroundI’m looking to do 20” squared actually
305 all around would require a 20x11 up front, which we could also do but will poke out the fender about 1/4 of an inch on each sideWhat offset though for the front and the back? Cuz I was thinking about running 305/30/20s all around.
Rear is 19x11 and ET 52.5Just wondering if anyone knows what the offset is on the Dark Horse Handling Pack wheels? Lookin to get some aftermarket wheels so i would like a reference. cant find it anywhere.
thank you!
Can run 19x11 50mm but front will need a spacerRear is 19x11 and ET 52.5
Front is 19x10.5 and ET 24
Same as Mach 1 HP. I have pictures of the inside of the wheels if needed.
or same thing 20''Rear is 19x11 and ET 52.5
Front is 19x10.5 and ET 24
Same as Mach 1 HP. I have pictures of the inside of the wheels if needed.
hey so i ended up getting 11/11.5 with 305/30/20 and 315/30/20s. 18 offset in the front and 58 offset in the back. im badly rubbing up front, what offset are you using for the 11s in the front? cuz i need to get a new wheelWe are running an aggressive setup of 11/11.5 or non aggressive which is 10/11 are you looking for 19'' or 20''?
the fender under compression, like going up the driveway and such. I saw project6gr had a setup with 20x11 and 20x11.5 on a s650 and wanted to know what the offset/tire size was.Are you rubbing on the strut or fender. Normally you have to run a lot of negative camber to get that to work, at least on the S550 cars.
the fender under compression, like going up the driveway and such. I saw project6gr had a setup with 20x11 and 20x11.5 on a s650 and wanted to know what the offset/tire size was.
![]()
Ya nope it’s on stock suspension. That picture is under load though going up the driveway. This fitment was for the gt350 so i thought it would work. 20x11 ET18 and 20x11.5 ET58 The backs fit perfect but the fronts rub bad under load. I have springs too and I def can’t lower with that wheel lolYou need to run more negative camber. You will probably have to run camber plates to get what you need for negative camber since you are probably limited to -1.5 stock. You will probably need at least -2.5. Maybe some people who run 11's up front can chime in. Also looks like the car is slammed.