Are any aftermarket companies making trim to replace the fake carbon fiber stuff in the interior?

[agreywolfe]

A quick search found this.
https://zetacomposites.com/products...MIksKo5dCWjgMVVZ9aBR3-rx0mEAQYBCABEgImdvD_BwE

heres one for the full interior: https://zetacomposites.com/products/2024-s650-mustang-carbon-fiber-dash-trim-kit-full-interior
its a tape on cover, not a full part replacement

Sponsored

 

[FWD]

A quick search found this.
https://zetacomposites.com/products...MIksKo5dCWjgMVVZ9aBR3-rx0mEAQYBCABEgImdvD_BwE

That's interesting. But I really wish a total replacement for these parts. Not just a cover.

Let's see what time brings.

 

[Bikeman315]

That's interesting. But I really wish a total replacement for these parts. Not just a cover.

Let's see what time brings.

Well, that’s part of the issue. The S650 is now going into its third model year. My belief is that an aftermarket company was going to do something, it would have already been done. Overall poor sales of the S650 with more unpopular changes for 2026 is not going to move the needle in the right direction. I think what you see is what you have.

 

[FWD]

What about covering it up with leather?
Have anyone tried it yet?

 

[Ve 8]

I don’t know why I don’t like the REAL carbon look in S650 I feel like that it doesn’t not match the car interior (maybe because of the glossy look), but it depends on your preference at the end..

 

[Ve 8]

I don’t know why I don’t like the REAL carbon look in S650 I feel like that it doesn’t not match the car interior (maybe because of the glossy look), but it depends on your preference at the end..

 

[FWD]

Have anyone tried this?

It seems a full carbon fiber replacement

https://ukiecarbon.com/collections/mustang-s650-interior-trims

 

[Bikeman315]

Have anyone tried this?

It seems a full carbon fiber replacement

https://ukiecarbon.com/collections/mustang-s650-interior-trims

Beautiful stuff but $4700 without the doors. But they are full replacement not covers.

 

[Mr Hyde]

Have anyone tried this?

It seems a full carbon fiber replacement

https://ukiecarbon.com/collections/mustang-s650-interior-trims

Nice parts but way overpriced unless it comes exactly as shown with everything. No im not trying to be an ass here either i just feel something is being intentionally misrepresented. I dont believe they are full parts. I think they are just covers, and they just removed the parts from the car and are showing the overlays as "full replacement parts" If you look at the center console is says perfectly intigrates the start stop button, and its not shown. The button is still in the car thats why its not shown with the rest of the parts. They also dont show how to "install" their parts. Though if you live within 300 miles of their location in new jersey they will install them for you for a reasonoable 75.00 per hr. The other tell is in the videos they show they never fully flip the part over or show a back to front look. More than likely due to showing the FOMOCO logo on the back. Something just doesn't pass the sniff test. I would love a set of proper replacements in cf or other materials as the s650 interior is quite lacking in all trims. For now i gota few cheapie hudrodipped overlays from fleabay as i really hate the look of the interior pannels. Though of course most companies are going to charge the CARBON FIBER TAX.

 

[Mr Hyde]

I don’t know why I don’t like the REAL carbon look in S650 I feel like that it doesn’t not match the car interior (maybe because of the glossy look), but it depends on your preference at the end..

I would like to see a real cf but matte finish or satin or even something similar to the s550 trim. Anything.

 

[erocker]

Nice parts but way overpriced unless it comes exactly as shown with everything. No im not trying to be an ass here either i just feel something is being intentionally misrepresented. I dont believe they are full parts. I think they are just covers, and they just removed the parts from the car and are showing the overlays as "full replacement parts" If you look at the center console is says perfectly intigrates the start stop button, and its not shown. The button is still in the car thats why its not shown with the rest of the parts. They also dont show how to "install" their parts. Though if you live within 300 miles of their location in new jersey they will install them for you for a reasonoable 75.00 per hr. The other tell is in the videos they show they never fully flip the part over or show a back to front look. More than likely due to showing the FOMOCO logo on the back. Something just doesn't pass the sniff test. I would love a set of proper replacements in cf or other materials as the s650 interior is quite lacking in all trims. For now i gota few cheapie hudrodipped overlays from fleabay as i really hate the look of the interior pannels. Though of course most companies are going to charge the CARBON FIBER TAX.

They're definitely not covers. If you look at the other pictures for each piece, they have mounting points. Still, way overpriced but they seem to be the only one's who have this stuff at the moment.

 

[Mr Hyde]

Thye are clip on overlays, Not full parts. THey dont say that they are full parts and are misrepresenting them. To be a full replacement they need to be a replacement not a fancy overlay. The cupholder shows this perfectly. They made a few overlay clips to hold the part on and not tape. You can see the factory ford tabs that hold it on and they even have some discoloration from being removed. If im paying these kind of prices i want a full replaement part. Again not being an ass just seeing oddities that arent being directly explained by the company.

 

[Danee]

With time.

 

[Paul's stable]

You must be a "youngster", at least compared to me... The Yugo was a car sold in the mid 1980's that is pretty much considered the absolute worst car ever made. https://en.wikipedia.org/wiki/Yugo

The yugo was an eastern bloc Russia that was the peoples car during the cold war. Some made it to western countries after the cold war. They were crap but really good in the snow.

 

[FWD]

Nice parts but way overpriced unless it comes exactly as shown with everything. No im not trying to be an ass here either i just feel something is being intentionally misrepresented. I dont believe they are full parts. I think they are just covers, and they just removed the parts from the car and are showing the overlays as "full replacement parts" If you look at the center console is says perfectly intigrates the start stop button, and its not shown. The button is still in the car thats why its not shown with the rest of the parts. They also dont show how to "install" their parts. Though if you live within 300 miles of their location in new jersey they will install them for you for a reasonoable 75.00 per hr. The other tell is in the videos they show they never fully flip the part over or show a back to front look. More than likely due to showing the FOMOCO logo on the back. Something just doesn't pass the sniff test. I would love a set of proper replacements in cf or other materials as the s650 interior is quite lacking in all trims. For now i gota few cheapie hudrodipped overlays from fleabay as i really hate the look of the interior pannels. Though of course most companies are going to charge the CARBON FIBER TAX.

Can you post some pictures of your car's interior?
I'm really trying to decide what to do with mine.

Sponsored