First production ESS S650 kit has arrived!

[Brevin]

Only thing you had to swap out was the injectors no fuel pump or tune?

Tuning is always required. Just swapped fuel injectors.

Sponsored

 

[Brevin]

That has to be with a BAP

That has to be with a BAP

No BAP on that car. Stock fuel pump and 55lb injectors

 

[crcpdx]

No BAP on that car. Stock fuel pump and 55lb injectors

Do you mind sharing the fuel pressures on those runs? Curious if it remained over 55 on the top end

 

[MattScopes]

Any plans for a lower priced G2 kit?

 

[Brevin]

Do you mind sharing the fuel pressures on those runs? Curious if it remained over 55 on the top end

It did hold right around 55-60 toward the end of the pull if memory serves me correctly. Never got low enough to require a BAP. However, a BAP is still probably a good idea.

 

[Brevin]

UPDATE:

We made a few changes to the S650 test car, this time around we added the following:

G3R head unit
Fore fuel system
Headers
8 rib drive system

This is still a 100% factory sealed engine! factory OPG’s and IMRC.

 

[Junkyard Dog]

I guess I should have asked in this thread, but I did not see it prior to the other one.

What fuel?

What PSI?

 

[Q6543]

What was SAE numbers? I’m always confused on the differential between them

Definitely awesome!!

 

[schmeky7]

No inlet tube and no air filter. Would like to see what it makes the way 99% of us drive, i.e. with a tube/filter.

 

[Brevin]

I guess I should have asked in this thread, but I did not see it prior to the other one.

What fuel?

What PSI?

E85 and peak of 20-22 PSI

 

[Brevin]

What was SAE numbers? I’m always confused on the differential between them

Definitely awesome!!

1085 and 766TQ SAE

 

[Brevin]

No inlet tube and no air filter. Would like to see what it makes the way 99% of us drive, i.e. with a tube/filter.

Most people won’t push a car this hard and especially not on a stock engine. This was just to show what it’s capable of in a race application. But throughout our testing it would make 30-50 less with the inlet and filter on it.

 

[Desert Dog]

Nice Build. I have a Shop just off Miller and Curry. We build Early 4x4's, Square Body Chevy's, Broncos and Scouts. I have a 18 with an Edelbrock and bought a 24 Recently. I would like to stop by your shop and check it out. Do you do Tuning In house or use a outside 3rd Party?

 

[Brevin]

Nice Build. I have a Shop just off Miller and Curry. We build Early 4x4's, Square Body Chevy's, Broncos and Scouts. I have a 18 with an Edelbrock and bought a 24 Recently. I would like to stop by your shop and check it out. Do you do Tuning In house or use a outside 3rd Party?

Awesome! More than welcome to come check it out anytime. @boostbarnracing on instagram or look us up on google. Shop is in Tempe next to Tempe marketplace. 3rd party tuning is used.

Sponsored