Stock PP Package Wheels Question- Widened by Weldcraft?

[Stanzi]

So I’ve got my 2026 scheduled to be here in December.

Performance Pack 301A

adding supercharger from the dealer.

can someone more experienced with these platforms help me out on this?

my initial thought is to run this setup:

Take the wider rear wheels and run them as fronts, and take the fronts and have WeldCraft widen them by 2” to 19x11” - will cost around $700.

Will this fit underneath the GT w PP?

I don’t want new wheels- I want to keep the stock look and just tuck more rubber underneath the rears for traction from the supercharger.

thanks in advance

Sponsored

 

[Riptide]

Dang you already have an arrival date? I just have production start 10/20/25

 

[Stanzi]

Dang you already have an arrival date? I just have production start 10/20/25

I don’t yet… just trying to prepare everything.

have a vin and build date week is 11/10.

I’m hoping by Christmas!

also praying they release the supercharger by then smh

 

[Riptide]

Ohhhh got it

 

[CRC123]

My date also 10/20 /25 finding the wait really tuff

 

[Stanzi]

My date also 10/20 /25 finding the wait really tuff

Same it’s brutal

 

[fvinazdesert]

The Dark Horse comes with 19X11 in back from the factory, so fitment won't be a problem.

 

[Cobrakit]

Weldcraft does a good job, but their price has increased and shipping is expensive. Plus you'll need a backup set of wheels while your's are getting widened, it takes a while. Good luck!

 

[CRC123]

Another fun thing to think about here in Michigan. I pick it up late November or early December and park it for the winter🥲…lol

 

[Junkyard Dog]

The Dark Horse comes with 19X11 in back from the factory, so fitment won't be a problem.

Only if he has the handling package.

Does he?

 

[Stanzi]

Weldcraft does a good job, but their price has increased and shipping is expensive. Plus you'll need a backup set of wheels while your's are getting widened, it takes a while. Good luck!

My territory includes the city /state where they are - so I’m just going to pack them incredibly well in a suitcase (one each), and bring them / ship them for free with my airline status

my main concern is, while the dark horse has 11” wide wheels, are the offsets different as such that it will create problems without the offset of the darkhorse 11” wheels?

 

[Cobrakit]

Your lucky, i had to pay shipping both ways. And most aftermarket 11in wheels move offset, Weldcraft, as you know, obviously doesn't.

Should have said move rim away from hub to give more clearance on backside, vice offset.

 

[DHGOOD]

Dark Horse handling package rears are 11” and the 10.5” fronts have more offset, are deeper on the front side. The lug nuts are recessed in further than the on the rear wheels. I haven’t tried to put the rear on the front for any reason but guessing they won’t clear the front calipers.

 

[fvinazdesert]

The 19X11 will fit in front if you install spacers and extended wheel studs. I tried it on my car that has the Handling Package, and it works.

 

[Stanzi]

Only if he has the handling package.

Does he?

I have the GT PP

Sponsored