Wheel Spacers!!

[heymoose]

Yes, mine are 9” all around. I had to grind off a good amount. But it looks great now. Not sure how deep the “wells” are on your 9.5” rims.

Thanks - I’m okay with grinding down the studs just wondering if my offset is different on the 9.5’s and if the 15mm is the correct size.

Sponsored

 

[89Trooper]

Thanks - I’m okay with grinding down the studs just wondering if my offset is different on the 9.5’s and if the 15mm is the correct size.

I did the math a while back. The offset on the 9.5” brings the tires in a bit so they stick out as much as the 9”. Or it’s at least very close. Drape a string over your fender wells with a nut on the end to see the distance they are under the fender. Then you can decide on 15mm all around or 15/20mm. But I think you’ll end up wanting the same all around. Good luck and let us know!

 

[heymoose]

I did the math a while back. The offset on the 9.5” brings the tires in a bit so they stick out as much as the 9”. Or it’s at least very close. Drape a string over your finder wells with a nut on the end to see the distance they are under the fender well. Then you can decide on 15mm all around or 15/20mm. But I think you’ll end up wanting the same all around. Good luck and let us know!

Thanks! Will do

 

[Silverstone]

Those of you running 25mm spacers....you're really not getting any rubbing at all? With hard cornering, big dips and bumps, etc., no rubbing? I guess it's possible, but hard to believe especially in the rear when all these pics of ppl running 1" spacers show the tires proud of the fenders by 5-10 mm.

 

[D/\rK•650]

I have to agree Silverstone, definitely seems like it would rub. If not it has to be like as close as in the thousands of inch.

 

[Junkyard Dog]

Is anybody here hitting the track with spacers?

Sponsored