Iāll give you a call tomorrow. Thanks
Sounds good !Iāll give you a call tomorrow. Thanks
Iām not rubbing.20x11 with a 305 tire is the same height as my GT wheels.
Your 315/35/20 tires are 28.7ā tall. 305/30/20 are 27.2ā. Stock 255/40/19 are 27ā tall. With those aggressive lowering springs thatās why youāre rubbing.
again, thereās tons of people running 20x11 on this forum and Mustang6G. I feel like adjusting your camber properly and running a 305 will be damn flush. Iāve done far too many hours of research on Mustang6G and Iām just trying to save you the time of doing the same
@Project6GR Wheels has multiple threads showing the fitment of their wheels which are the same offset as the HREās unless Iām mistaken but a quick search shows theyāre the same offset.
when you have a minute could you take a picture like the OP does up close to the fender? Would be nice to compare and have for reference! Thanks!I did 11" HRE's with 305s and I think it turned out just fine.
https://www.mustang7g.com/forums/threads/20-hre-ff04s-on-michelin-pilot-super-sports.159671/
Wheels are 10" wide ET35 (f), 11" wide ET50 (r);that looks perfect to me. Whatās the setup?
āwhatās your rear camber? It looks great. I wonder if my wheels are the wrong offset. Youāre not running anywhere near as much camber as I am and it looks perfect to me. Maybe itās my car?Wheels are 10" wide ET35 (f), 11" wide ET50 (r);
tires 275/35 (f), 305/30 (r)
I've made no suspension modifications. The camber is at factory settings. Glad you like you it, I think it looks good. Honestly, there is just a touch of poke.āwhatās your rear camber? It looks great. I wonder if my wheels are the wrong offset. Youāre not running anywhere near as much camber as I am and it looks perfect to me. Maybe itās my car?
āI donāt see any poke. I hate any poke. About as much as I hate too much negative camber. LolI've made no suspension modifications. The camber is at factory settings. Glad you like you it, I think it looks good. Honestly, there is just a touch of poke.
You are right.This is definitely a you problem and not an HRE problem.