FORScan help with A10 gear indicator

[GrabThatBlue]

I got a heated wheel with paddles but my stock wheel is not heated. Will the paddles still work?

I don't get the paddles part. I would understand the question if you asked if the heated wheel will work.

Sponsored

 

[fablighting]

I got a heated wheel with paddles but my stock wheel is not heated. Will the paddles still work?

The paddles will work, but the heated functionality will not.

 

[DarkkMatter]

On my GT Premium if you hit either side of the buttons on the back of the steering wheel, the Gear Indicator shows under the RPM Gauge for the Automatic. This is while in Drive.

 

[StangaLang]

The paddles will work, but the heated functionality will not.

So I just cut and tape the heater plug?

 

[StangaLang]

I don't get the paddles part. I would understand the question if you asked if the heated wheel will work.

I was just wondering if I will have errors since its a different harness. Wasn't sure how that worked.

 

[fablighting]

So I just cut and tape the heater plug?

I didn't cut anything, just tucked the heater plug off to the side and left it as is.

No error codes or anything like that.

 

[StangaLang]

I didn't cut anything, just tucked the heater plug off to the side and left it as is.

No error codes or anything like that.

Nice. Thank you!

 

[WhooptieDo]

Do you think this will work on a 100A? This PRNDL thing is driving me insane, didn't really expect it. I'd be willing to do an upgrade for my sanity, nothing annoys me more right now than letting off the gas before a shift and not being able to drop the RPMs.

I'm also not sure how the L is supposed to function, is it just a first gear lockout? I saw someone else on the forum here talkin about putting it in L and hammer down for launching, but haven't had the car long enough to test that theory.

 

[StangaLang]

I got my wheel installed today but my paddles are not working in D or M. My display shows the "M" instead of L. I can see what gear I'm in when in D and when in L it acts like its in M and will not shift. I did do the coding in forscan before I installed the wheel. You think that could be the problem?

 

[SergioDiego]

Hi guys, I have a non-PP Eco 2024 (build date 08/2023). I made my own harness and cut the holes for the paddle shifters (magnetic with carbon fiber) — all good there, they’re working perfectly.


My problem is that I can’t get the Continuous Gear Display to show in any drive mode other than Sport. For Select Shift PCM 7EO-163-01 1001-0100-015E I updated from 015E to 025E, cuz i didn't have 7E0-03-01 .

 

[l10dvc]

Hi guys, I have a non-PP Eco 2024 (build date 08/2023). I made my own harness and cut the holes for the paddle shifters (magnetic with carbon fiber) — all good there, they’re working perfectly.


My problem is that I can’t get the Continuous Gear Display to show in any drive mode other than Sport. For Select Shift PCM 7EO-163-01 1001-0100-015E I updated from 015E to 025E, cuz i didn't have 7E0-03-01 .

have you figured out how to get CGD on all other modes?

Sponsored