• Welcome to Mustang7G!

    If you're joining us from Mustang6G, then you may already have an account here!

    As long as you were registered on Mustang6G as of March 10, 2021 or earlier, then you can simply login here with the same username and password!

DH bugs since day one

Zbychersky

Well-Known Member
Joined
Mar 3, 2024
Threads
4
Messages
75
Reaction score
78
Location
Poland
Vehicle(s)
DH MT6 + Recaro
Hi I picked up my DH in Europe in June this year. Since day one the car has bugs as below which cause most of the "safety" assists in the car to not work. Only the reversing camera and auto hold work.
S650 Mustang DH bugs since day one Screenshot_20240816_070328_Drive

Has anyone encountered problems like this before? My dealer has been unable to deal with these problems for 3 weeks and they are waiting for guidance from the factory in the USA.

If you have had such problems how were they resolved?
Sponsored

 
Last edited:

Skye

Well-Known Member
Joined
Jul 29, 2022
Threads
0
Messages
1,314
Reaction score
1,859
Location
≈39N
Vehicle(s)
"Skye" Mach1 N2144
Cześć,

I can think of two things which could help:

- Confirm the car's battery is full-charged, capable of holding a charge and carrying a load. Your car took time to ship from the US to EU. We had several problems here, that, due to weak batteries, presented themselves. These issues were often fixed when either the battery had a good charge applied or was replaced

- Make sure the car has all the latest software updates. Several Body Control Module and Powertrain Control Module updates occured after the model release. The dealer can check all the module software versions and confirm they are up-to-date

dbać o siebie
 
Last edited:
OP
OP
Zbychersky

Zbychersky

Well-Known Member
Joined
Mar 3, 2024
Threads
4
Messages
75
Reaction score
78
Location
Poland
Vehicle(s)
DH MT6 + Recaro
Cześć,

I can think of two things which could help:

- Confirm the car's battery is full-charged, capable of holding a charge and carrying a load. Your car took time to ship from the US to EU. We had several problems here, that, due to weak batteries, presented themselves. These issues were often fixed when either the battery had a good charge applied or was replaced

- Make sure the car has all the latest software updates. Several Body Control Module and Powertrain Control Module updates occured after the model release. The dealer can check all the module software versions and confirm they are up-to-date

dbać o siebie
I just received new info from the dealer, they are waiting for special technician from Ford to do deep reset of modules.
 

Skye

Well-Known Member
Joined
Jul 29, 2022
Threads
0
Messages
1,314
Reaction score
1,859
Location
≈39N
Vehicle(s)
"Skye" Mach1 N2144

Ryunker

Well-Known Member
Joined
Apr 2, 2023
Threads
18
Messages
386
Reaction score
442
Location
Madison South Dakota
Vehicle(s)
2013 convertible, 1971 Mach1
Hi I picked up my DH in Europe in June this year. Since day one the car has bugs as below which cause most of the "safety" assists in the car to not work. Only the reversing camera and auto hold work.
Screenshot_20240816_070328_Drive.jpg

Has anyone encountered problems like this before? My dealer has been unable to deal with these problems for 3 weeks and they are waiting for guidance from the factory in the USA.

If you have had such problems how were they resolved?
Just had mine repaired, it was the electronic brake booster.
S650 Mustang DH bugs since day one 20240814_080520


It took many trips, most visits were "re-charged battery. Last visit they replaced this suspected of causing other communication codes.
 
OP
OP
Zbychersky

Zbychersky

Well-Known Member
Joined
Mar 3, 2024
Threads
4
Messages
75
Reaction score
78
Location
Poland
Vehicle(s)
DH MT6 + Recaro
It turned out that the software was to blame. When the car arrives in Europe, they upload software updates at the customs warehouse. In my case, they loaded the software for model 2024 instead of 2024.5, which is why there were so many errors and the assistants did not work.

A Ford technician uploaded the software for 2024.5 and all the errors disappeared, but a new one appeared concerning the IPMA module and the processing of data from the steering column.

Another enquiry went to the US factory about this.
Sponsored

 
 








Top