Sponsored

Dashcam

LouG

Well-Known Member
Joined
Mar 11, 2025
Threads
36
Messages
2,794
Reaction score
3,307
Location
New Zealand
Vehicle(s)
2025 Mustang GT
Thanks. I had another look and mine definitely doesn't have it. Maybe it came with the premium. For now I just have a wire dangling down to the USB port. But once the warranty is up I plan to run it through the headliner down the A pillar and plug it into the OBD2 port. That's what I did with my daily driver Mazda and my wife's Escape. It's pretty clean that way.
That's what I've done. Why would it affect warranty?
Sorry, just reread you post. I ran mine to the lighter plug. But the OBD port shouldn't be a problem should it?
An advantage with the lighter plug is that it's powered on for some time after switch off and gives some parked surveillance.
 

Bugsmasher

New Member
Joined
May 6, 2026
Threads
0
Messages
4
Reaction score
2
Location
Toronto
Vehicle(s)
2026 Mustang GT
That's what I've done. Why would it affect warranty?
Sorry, just reread you post. I ran mine to the lighter plug. But the OBD port shouldn't be a problem should it?
An advantage with the lighter plug is that it's powered on for some time after switch off and gives some parked surveillance.
It probably wouldn't affect warranty but you never know, plus they might have to plug into it at some point. The OBD2 cable has a switch on it for two choices. You can keep it powered 24hours for the g sensor, motion sensor etc. Or you flip the switch and it keeps the camera powered for 20 minutes after the car is turned off and then shuts down. I like it because you just have to get the cable to the side and not back to the middle. It goes in the headliner (easy), then in top seam of the A pillar cover (removal not needed), and then down the channel underneath the door seal. It's pretty clean in my Mazda.
 

DarkkMatter

Well-Known Member
Joined
Jan 29, 2025
Threads
22
Messages
213
Reaction score
245
Location
Virginia, USA
Vehicle(s)
2019 Ram Rebel, 2025 GT Premium with PP, Active Exhaust, 401A, Magnaride.
I only use the Front cam only. Not sure how I'd mount the rear camera. Most certainly will not on the window with the tint on it.

Not sure where else to mount it.
 


Lutotarek

Member
Joined
Nov 16, 2023
Threads
2
Messages
14
Reaction score
2
Location
Victoria
Vehicle(s)
2018 6G
I use a Mercylion front and rear setup. As a 4 channel mirror dash cam, it's hardwired into the fuse box with a low-voltage protection kit. The wiring is completely hidden behind the trim, and it's been reliable from day one.
 

mks

Well-Known Member
Joined
Oct 23, 2016
Threads
3
Messages
90
Reaction score
65
Location
CO
Vehicle(s)
2026 DH T3590
Fitcamx w/Front 1440P+ Rear 1080P cams.

Have had other brands in the past, e.g., Blackvue DR970X-BOX-2CH-PLUS w/batt pack for parking mode. However, the lack of OEM appearance always kind bugged me.
Sponsored

 
 








Top