Best oil drain pan when using ramps

[Frogdog1]

Just talked with my Ford dealer service manager and they will do an oil and filter change as the first appointment at 7:30am next week, for their $35 labor total cost with me bringing my own 10 quarts of PUP and oil filter both bought cheap from Amazon.

Total cost for the oil change including my supplied oil and filter will total about $105. I'll pass on going "salamander" under my car and dealing with oil for $35 any day. No muss, no fuss, cheaply bought oil and filter and off I go for a while. Can't beat that.

Sponsored

 

[Cz_Ziemniak]

$105 is honestly pretty reasonable nowadays, parts and labor and all.

 

[Frogdog1]

$105 is honestly pretty reasonable nowadays, parts and labor and all.

Yeah, the parts cost what they cost but $35 labor charge is what I thought was amazing considering shop rates are $165 an hour on the low side nowadays. I'll pay $35 not to crawl under my car any day.

As an adder, their lowest tenured Tech has been there 10 years with the others having been there around 20+ years. They pay them well too so, little turnover. I consider that another plus. It's the most unusual dealership I've ever bought a car from and dealt with.....so far.

 

[Cz_Ziemniak]

Yeah, the parts cost what they cost but $35 labor charge is what I thought was amazing considering shop rates are $165 an hour on the low side nowadays. I'll pay $35 not to crawl under my car any day.

As an adder, their lowest tenured Tech has been there 10 years with the others having been there around 20+ years. They pay them well too so, little turnover. I consider that another plus. It's the most unusual dealership I've ever bought a car from and dealt with.....so far.

As a tech, I believe my work was $180 an hour if I remember correctly, granted it was a more specialized kind of work.
I know some dealers in CT that charge $300, hahah

 

[Farmer Fran]

I use something similar to this and then dump it into other containers to take the acceptance facility

Motivx Tools Oil Drain Pan

It catches the splatters and is easy to clean out.

I do my own oil changes so I can make sure it is done correctly, and it gives me a chance to take a look/inspect under the car.

 

[roadpilot]

$105 is honestly pretty reasonable nowadays, parts and labor and all.

I use something similar to this and then dump it into other containers to take the acceptance facility

Motivx Tools Oil Drain Pan

It catches the splatters and is easy to clean out.

I do my own oil changes so I can make sure it is done correctly, and it gives me a chance to take a look/inspect under the car.

That is the exact same pan I've had and used for many years.

 

[RLE55]

I have lots of time I'm retired.

sooooo nice to be retired.......

 

[Frogdog1]

sooooo nice to be retired.......

I don't know what "retired" means, RLE55......interesting concept though. I just don't work. Been there, done that. It was fun most of the time. Worked for companies then decided having my own company would be more rewarding and it is or was, however I want to look at it. I still pay taxes under an LLC.

Started, at 17 y.o. working in offshore drilling for a great company during 5 summers while going to a great university. Got a degree(s), went to work making less money than offshore around the world but was on the career ladder with a nice education through work and academically. Continued to climb the ladder while continuing my education, then decided work wasn't necessary any more after adding up my assets, so I just stopped doing that.

Key words: work, education, more education, more work, and no f--king debt (slavery).

Add it all up and here I am with a Mustang I like (so far) and messing around on a Mustang forum on a Sunday afternoon reading my post on oil pans, LOL! Peace!

 

[Paul's stable]

sooooo nice to be retired.......

Yup it almost makes me forget all the crap I did to get there.

 

[RLE55]

Yup it almost makes me forget all the crap I did to get there.

Agree...nice to live a stress free, peaceful life now. After 40 years of gov't svc, still working on getting some of the "crap" out of my head.

 

[Dzm13]

This is what I use:
Bigger pan (Walmart) to drain from the plug
Smaller pan (Harbor Freight) for the filter area
Jag to carry oil to the recycling facility https://www.amazon.com/dp/B01MSNWXD6?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2
Wrench to open/close oil container https://www.amazon.com/dp/B0D9LVY1TV?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1

Sponsored