Automatic Shift Knobs

[roadpilot]

non pp here and mine has M not L

Hey, maybe you got his and he got yours!

Now that I think about it, if it has paddle shifters, you should have an "M", but without them, an "L". I assume you have the paddles?

Sponsored

 

[Rip Actual]

Hey, maybe you got his and he got yours!

Now that I think about it, if it has paddle shifters, you should have an "M", but without them, an "L". I assume you have the paddles?

Yes I have paddles, so maybe the eco boost has L since they don't come with paddles

 

[Stangerous]

Don't the non-PP automatic 2024 Mustangs have "L" instead of "M"? I recall a post here with someone's PP car apparently getting the wrong console that had an "L" (low).

Hmm, not sure about that I have the premium PP and it has M.

 

[roadpilot]

Hmm, not sure about that I have the premium PP and it has M.

Yes, I corrected in a subsequent post. M is if you have paddles, L if not. You can't very well shift manually if you don't have paddles ... LOL

 

[Matts2024GT]

A classic style "T" handle shifter would be a good option for the 10R80.
No one makes it though.

 

[DukeCLR]

I'm going to contact Barton and see if they have another cap with the correct lettering.

 

[Sofa King]

A classic style "T" handle shifter would be a good option for the 10R80.
No one makes it though.

Actually...

 

[Radiant]

I'm going to contact Barton and see if they have another cap with the correct lettering.

I placed an order directly with Barton Industries to get the kit without engraving. With the current 20% off sale, it was $176 for brushed aluminum with a Grabber Blue shift knob.

 

[roadpilot]

Ok, so I finally watched your video, @Rip Actual. You indirectly answered a question I had that the other videos didn't, so I gotta give props. A little wordy, but otherwise pretty good ...

P.S. - Your hat was backwards the entire video.

 

[Rip Actual]

Ok, so I finally watched your video, @Rip Actual. You indirectly answered a question I had that the other videos didn't, so I gotta give props. A little wordy, but otherwise pretty good ...

P.S. - Your hat was backwards the entire video.

Yea I got a little long winded there, I just want to try and explain products that I put on my car so someone can make a better decision. Want to give as much information as possible.

 

[24BlueStang]

I didn’t like the factory one either. Don’t bother me one bit if someone that will never be in my car likes it or not.

I was thinking of doing that one but also do the standard trim around it as well so you don’t see the gears there lol

 

[Stangerous]

I was thinking of doing that one but also do the standard trim around it as well so you don’t see the gears there lol

I'm ordering that trim panel

 

[roadpilot]

I'm ordering that trim panel

Got a P/N?

 

[roadpilot]

I'm going to contact Barton and see if they have another cap with the correct lettering.

I just emailed them to see if they could engrave with P/R/N/D/M to match the S650 with paddles. Will see if they reply -- they didn't answer the phone when I called.

I actually tried to call both Barton and Billetworkz. Everybody wants your $200+ for a shifter knob, but nobody wants to answer the phone.

 

[Stangerous]

Got a P/N?

Got a P/N?

It’s odd that when you look the part number up on line it shows the S550 style boot and trim, but the counter guy showed me the diagram on his screen and I can confirm it’s the S650 boot and trim. Your part number may vary, this is for the red stitching.

Sponsored