Active exaust not working properly

[614DarkHorse]

I recently purchesed MBRP active exhaust for my DH and its been on for a bout a month, on my way home from work this morning before i get into my neighborhood i went to put it on silent and i got , This feature is not availabe currently message. When i checked it out today, when i first start up and i go to change the setting u can hear multiple aubible clicks and u can see the valve going from Fully open to 3/4 open multiple times and then just stops and you can select any modes. Its on the drive side that does this. Do i more than likely need to replace this actuator?

Sponsored

 

[erocker]

I'd start with disconnecting the battery for a bit and see if that resets things or check to see if MBRP has some sort of reset procedure for it.

https://www.mbrp.com/us-en/contact Their support number is there too.

 

[86pagt]

Battery disconnect or double check the spring that engages the slot in the actuator…

 

[614DarkHorse]

checked the sping it is fine , reset the codes with forscan, ill try to disconnect

Sponsored