20x10 Tire Size Help

[Carter1776]

Good morning, all! I have finally placed my order through Velgen for my Gloss Black VF10s 20x10 F and 20x11 R, now onto ordering my tires! with that being said, the car is lowered on Steede Progressive Springs. The rear I am going with 305/30R20 Nitto NT555 G2s, for the front I think I'm set on 285/35R20s but am very slightly concerned on possible rubbing! I have seen other members running 275/35R20s without issue, and the width difference between 275s and 285s is less than .5", so I find it hard to think it'll rub. Any insight or confirmation on this would be highly appreciated!

Sponsored

 

[roket]

i run 325/30R19 front and only rub a small outer edge bit of my tire on the front of the fender liner when at steering lock. you might be alright? but i cant say for sure

 

[Sofa King]

Check the diameter... I think the 285/35 will be a bit taller than the rear 305/30... I think I would go 285/30... should be less clearance issues with lowered car.

 

[Project6GR Wheels]

Hey Carter, here is a example of one of our clients that has the same steeda springs. We did the same 20x10 20x11 wheel setup. For tires they are 285/35/20, 305/35/20. We like doing the 35 side wall all around so the car is level. Customer states no rubbing. It is a common setup we do all the time, you shouldn't have any issues. Getting a alignment after the wheels are installed is a good idea.

Sponsored