dark horse 19x9.5 Front, 19x10 max tire size?

[agentdarnell]

Not with different size/ offset rims there isnt lol. Unless you want to dismount

He is literally asking about running the oem wheels which have different offsets and rim width’s. Which in that case there isnt a point to run the same size tires all around because they cannot be rotated without being dismounted. He would need to get after market wheels that have the same offsets and width.

Thanks. I went with the 275 all around and they said they can dosmount them whenever I need a tore change. I didn't get any responses before the tires came in. In the near future I'll look at getting wider rims like the 10" all the way around.

Sponsored

 

[Junkyard Dog]

Thanks. I went with the 275 all around and they said they can dosmount them whenever I need a tore change. I didn't get any responses before the tires came in. In the near future I'll look at getting wider rims like the 10" all the way around.

or 11s . . .

or fender flares and 12s . . .

 

[bountifulgoose]

Thanks. I went with the 275 all around and they said they can dosmount them whenever I need a tore change. I didn't get any responses before the tires came in. In the near future I'll look at getting wider rims like the 10" all the way around.

I will probably go that route in the future as well except drop to 18’s so probably a 275 45 18 all around for some extra meat. L

Thanks. I went with the 275 all around and they said they can dosmount them whenever I need a tore change. I didn't get any responses before the tires came in. In the near future I'll look at getting wider rims like the 10" all the way around.

hows the fitment with the 275 in front?

 

[Junkyard Dog]

I will probably go that route in the future as well except drop to 18’s so probably a 275 45 18 all around for some extra meat. L

hows the fitment with the 275 in front?

On a Dark Horse? Why?

Also, do you have the 390mm rotors up front? You may have trouble finding 18" wheels that fit over the calipers, and for the drop barrel wheels that do fit, clearance is tight and may lead to damage to the wheel if anything gets caught in there (rubber from the track, a rock, &c.).

 

[bountifulgoose]

On a Dark Horse? Why?

Also, do you have the 390mm rotors up front? You may have trouble finding 18" wheels that fit over the calipers, and for the drop barrel wheels that do fit, clearance is tight and may lead to damage to the wheel if anything gets caught in there (rubber from the track, a rock, &c.).

Having more meat for these rural America roads I drive on would be nice. Ive always felt 18’s were the perfect size. Ive never been a fan of large wheels even my truck runs 17’s. But yeah your right finding wheels that will fit will be a challenge.

 

[Cobrakit]

I can't remember the last time I rotated tires. Again, for DH non HP, If you like the Pirelli Pzeros, you can put the rear tires on the front rims and 305/35s on the rear.

 

[agentdarnell]

I will probably go that route in the future as well except drop to 18’s so probably a 275 45 18 all around for some extra meat. L

hows the fitment with the 275 in front?

Fitment us great. There are no issues.

 

[exm]

Fitment us great. There are no issues.

Hi, are you still happy with them? I am considering the same setup

 

[agentdarnell]

Hi, are you still happy with them? I am considering the same setup

Yes I am very pleased with them.

 

[hoodscoops]

Sorry for dirty wheels, but this is my daily driver.

275/40 on stock 9.5 in rim

305/35 on stock 10 in rim

Sideview, but hard to see slight difference in diameter.

Looks good. No bulge

 

[Cobrakit]

Looks good. No bulge

Thanks, I was just getting ready to take new pics! Yes, they look like there made for rims. But again, 305/30s won't work on 10in rims.

Sponsored