Sponsored

Whipple question - what mods get me to mid 800s or pushing 900???

Uwood

Member
Joined
Jul 15, 2025
Threads
0
Messages
13
Reaction score
8
Location
Illinois
Vehicle(s)
24 GT
I am super curious what you get out of that. I assume on 93?

Have the Stage 2 stuff (120mm TB and Whipple stage 2 canned tune) ready to go in, impatiently waiting on a 3.650” pulley instead of running the 3.750” the kit came with. Added a fuel pump voltage booster for piece of mind. Thinking this is as far as I’ll go. Famous last words.
Sponsored

 

gregrarnold

Active Member
Joined
Dec 22, 2023
Threads
1
Messages
35
Reaction score
48
Location
North Franklin, CT
Vehicle(s)
‘24 Dark Horse Whippled, ‘24 F350 Platinum, ‘84 CJ-7, ‘19 Road Glide,
I am super curious what you get out of that. I assume on 93?
Installed the 112mm TB w/intake boot, 3.625” pulley, and the canned Whipple Stage 2 tune last weekend. Sticking with 93 octane only. Need to find some time to get on a dyno. First impression; rowdier and boost comes on sooner in RPM range.

S650 Mustang Whipple question - what mods get me to mid 800s or pushing 900??? IMG_4865


S650 Mustang Whipple question - what mods get me to mid 800s or pushing 900??? IMG_4859


S650 Mustang Whipple question - what mods get me to mid 800s or pushing 900??? IMG_4864
 

Q6543

Well-Known Member
Joined
Dec 11, 2022
Threads
21
Messages
2,190
Reaction score
2,855
Location
Detroit
Vehicle(s)
1993 fox
I just cruise around and whenever I feel like it casually GAP THE FXCK out of whatever.

including Lambs, Rari’s, Mac’s, Z 0h anything’s, ZR anything’s… vipers, 500’s, S550’s … other S650’s… put a bus on a new Shelby GT350 last weekend.

and then go back to slow poking in 10th getting 25mpg’s
 
Last edited:

Junkyard Dog

Well-Known Member
Joined
Jun 3, 2025
Threads
54
Messages
2,560
Reaction score
2,061
Location
Georgia
Vehicle(s)
2024 Dark Horse
Installed the 112mm TB w/intake boot, 3.625” pulley, and the canned Whipple Stage 2 tune last weekend. Sticking with 93 octane only. Need to find some time to get on a dyno. First impression; rowdier and boost comes on sooner in RPM range.

IMG_4865.jpeg


IMG_4859.jpeg


IMG_4864.jpeg

In your opinion is the 3.625" pulley safe for 93 octane?
 


Q6543

Well-Known Member
Joined
Dec 11, 2022
Threads
21
Messages
2,190
Reaction score
2,855
Location
Detroit
Vehicle(s)
1993 fox
No, go BAP/E30 or something to get more octane.

120 may need a tune update… call VMP, Justin should have the answer
 

gregrarnold

Active Member
Joined
Dec 22, 2023
Threads
1
Messages
35
Reaction score
48
Location
North Franklin, CT
Vehicle(s)
‘24 Dark Horse Whippled, ‘24 F350 Platinum, ‘84 CJ-7, ‘19 Road Glide,
I don’t pretend to be an expert with any of this, was told as long as I had a fuel pump voltage booster I’d be on inside edge of safe with 3.625”. I’ll ultimately swap in the 3.750” that came with Stage 2 stuff. Just wanted to try it out for fun. Where I live ethanol fuel isn’t that common around my parts.
 

Junkyard Dog

Well-Known Member
Joined
Jun 3, 2025
Threads
54
Messages
2,560
Reaction score
2,061
Location
Georgia
Vehicle(s)
2024 Dark Horse
Of the throttle body or something else (like the engine)?

The 112mm is more reliable?
 

Billycar11

Well-Known Member
Joined
Apr 23, 2024
Threads
1
Messages
392
Reaction score
323
Location
USA
Vehicle(s)
2024 Dark Horse, 2007 Pontiac Grand Prix
Of the throttle body or something else (like the engine)?

The 112mm is more reliable?
the throttle body there are some bad ones where it catches on it self with differential heat expansion causes a code and limp mode
last gen alot of issues with aftermarket throttle bodys not just the one

they may have fixed it in the new generation but i got the gt500 throttle body to avoid it
Sponsored

 
 








Top