It’s a centri blower. Half the reason people by them is for the whistle hahaIs it just the mic or the harmonics ? Inside not bad, outside ….
Completely understood. Although still haven’t figured out why some folks haven’t found a way to have some fun with it and make it sing instead of whistle lol.It’s a centri blower. Half the reason people by them is for the whistle haha
Completely understood. Although still haven’t figured out why some folks haven’t found a way to have some fun with it and make it sing instead of whistle lol.
Completely comprehend. Was just trying to figure out if it was the mic or the speaker. Once stepped across the front and that one little dive under the hood sent the sound into vibration whistle. Wasn’t trying to say it wasn’t warranted was asking if the harmonics live were as they seemed in the recording.This is just how Centri's sound. You are not getting them to "sing" LOL
There is a gear option to make them less noisy but that's it.
They also go WOOOSH with the stock bypass and go WOOOOOOOOOSH with the race bypass.
you don't really have to worry about the "boost pushing the throttle open" because it won't really make boost unless you're at WOTOne blower two intakes throttle bodies out of unison. Does the second tb suffer from forced resistance and either get pushed open from the added boost or will tuning address?
Really it's more about RPM...I can be at 5000 RPM at part throttle and still pushing a lot of boost. As you stated, a bypass/blow-off valve is required to prevent over pressure of the intake.you don't really have to worry about the "boost pushing the throttle open" because it won't really make boost unless you're at WOT
During idle and part throttle the bypass valve is open and letting the unused air out. It doesn't really work like a turbocharger.
This is the “quiet” helical gears. The straight cut gears are loud haha. And this is the standard bypass. I want the race valve but had to do testing for the standard version first. The race valve will be on soon haha!This is just how Centri's sound. You are not getting them to "sing" LOL
There is a gear option to make them less noisy but that's it.
They also go WOOOSH with the stock bypass and go WOOOOOOOOOSH with the race bypass.
This is the “quiet” helical gears. The straight cut gears are loud haha. And this is the standard bypass. I want the race valve but had to do testing for the standard version first. The race valve will be on soon haha!
It’s not that loud in person. I just went back and watched the video lolReally, I had the straight cut gears and it sounded exactly like that. I didn't think they were loud.