Tire pressure & temperatures in main display

[D/\rK•650]

Do none of the settings in IPC (TTD Enabled) work? or has no one tried it yet

Ill try this, which module is this screen from? Im new to Forscan so need little info. Oh just saw you posted IPC.. doh. Anyway I'll report back when I get a chance to try.

Sponsored

 

[D/\rK•650]

I've tried another one that says Tire temperature, not sure which module that was though. Did nothing.

 

[VaporGT5.0]

I've tried another one that says Tire temperature, not sure which module that was though. Did nothing.

might have to enable it in more than one place? or it might just not work at all

 

[Linwei]

Do none of the settings in IPC (TTD Enabled) work? or has no one tried it yet

Tried this but it did nothing for me. I think something in the BCM also needs to be adjusted. Haven't found which one exactly.

 

[Neggytive]

you could easily figure out the tire temp by using the Ideal Gas Law and make a chart

A common rule of thumb is that for every
10 degree change in temperature, tire pressure changes by approximately
1--2 psi

https://pressbooks.uiowa.edu/clonedbook/chapter/the-ideal-gas-law/

 

[Fruitstang]

Those pressue/temp relations I firstly thought about, too.
But then I remembered a top top from a friend of mine how to check if you have a puncture without a pressure gauge:
Feel by hand if the sidewall of a tire is hotter than the other(s).
Rubber deforms more when pressure drops, so the correlation flips somewhere.

 

[D/\rK•650]

Do none of the settings in IPC (TTD Enabled) work? or has no one tried it yet

This was the one ive tried previously but it did not work.

Sponsored