FORD PERFORMANCE Vs. VORSHLAG CAMBER PLATES

[ISLAND DARK HORSE]

Dark Horse Comes standard With Ford performance Adjustable camber plates. Does anyone know If the Vorschlag Camber plates Allows for greater Adjustability?

Or are there any other brands or manufacturers out there that give you more negative camber than the OEM Ford performance units?

Sponsored

 

[tj@steeda]

Let me circle back with our team - we have the camber plates for the Dark Horse listed on a set of our camber plates but not the other set - let me confirm our fitment.

Best,

TJ

 

[tj@steeda]

555-8139 camber plates will fit the Dark Horse model cars using the stock Magna-Ride struts and factory-style springs. Our camber plates offer a wider range of adjustment than other plates on the market (or the factory Handling Pack cars).

We have installed them on several cars without any issues.

We'll get the website updated!

Best,

TJ

 

[ISLAND DARK HORSE]

Thanks TJ.

Before I place my order, it's important to confirm that there is more adjustment available than the Ford Performance unit. I'm happy with them, but am looking for another degree or so. I have already cut the tower using the Steeda hole saw.

Thanks

 

[tj@steeda]

Yes there is - based on feedback from our lead tech. Send me your contact info to [email protected] & let's have the conversation with him to confirm via your place you order.

Send to tim@steeda

Thanks!
Tim

 

[DemonWorks]

Bring the conversation on here. The info Island Dark Horse is asking for could be beneficial to those of us that are searching for this info.

 

[ISLAND DARK HORSE]

Bring the conversation on here. The info Island Dark Horse is asking for could be beneficial to those of us that are searching for this info.

Will do. I'm waiting to hear back from Jamie - lead engineer at Steeda.

 

[ISLAND DARK HORSE]

From Jamie at Steeda........
Good morning,

Our camber plates will fit the Dark Horse model cars with Magna-Ride suspension with out need for any extra adaptors or hardware. The Ford Performance camber plates(or factory handling pack) will only allow about 1.2 degrees of adjustment total. This limits the amount of negative camber that can be achieved, typically this comes out to around -2.3 to -2.5 degrees. Our plates will adjust to -2.7 to -3.0 degrees without any other modifications. If the tip end of the strut shafts are trimmed off to allow the strut shafts to slide under the strut tower opening, you can get up to -3.5 degrees of camber. This minor modification will not change the limits of the Ford Performance plates

 

[DemonWorks]

Thanks for sharing !

 

[dsmiadh]

@ISLAND DARK HORSE if you still have the Steeda cutting tool and are wanting to sell it let me know. Did you end up going with the Steeda camber plates?

Sponsored