Enable oil press. Gauge Detail in cluster

[CTX148]

Just in case it might help anyone with an Ecoboost, I was able to enable the Oil Pressure reading in the cluster (Gauge Detail). My Ecoboost vert. didn't show that option originally.

Was able to use Forscan and changed the following in IPC:

720-06-01: xxx* xxxx xx--
Changed from "D" to "F" to enable O.P. Display

720-06-01: xxxx xxxx *x--
Changed from "1" to "3" to enable O.P. sensor.

Sponsored

 

[Stanger_Management]

I know this not related to your original post but CTX148 have you tried or have done to gauge cluster to show gas level percentage in all drive modes other than track mode?

 

[CTX148]

Sorry, I havent seen anything regarding the DTE vs % calculation . Im still looking in to FORSCAN and seeing all the things it can do. I'll try and make sure I post possible changes as I find them.

 

[Stanger_Management]

I was more interested in this than DTE But appreciate your reply and help

Sponsored