Cobra Jet Manifold (for S650)

[tdstuart]

Ford has released a new Cobra Jet intake manifold featuring dual throttle bodies to support the S650 mustang!

The retail price is $1500. Porting options are already available from 1320 junkie.

Ford states the S550 may need hood modifications or aftermarket lower engine mounts to fit with the stock hood (no word on fitment for S650).

It will need custom vacuum line routing to fit auto transmissions (at least for the s550), but this was also the case with the previous cobra jet.

This intake has been redesigned and will support 20+ PSI and has been tuned for 7,750 rpm peak power.

Some links to buy (not sponsored):
Ford Performance: https://performanceparts.ford.com/part/M-9424-M50CJB
Steeda: https://www.steeda.com/ford-performance-m-9424-m50cjb-mustang-cobra-jet-intake-manifold
Lethal (porting): https://www.lethalperformance.com/1...ed-cobra-jet-intake-manifold-5-0l-coyote.html
Lethal (standard): https://www.lethalperformance.com/f...ntake-manifold-5-0l-coyote-m-9424-m50cjb.html
1320 Junkie (porting): https://juggernautpower.com/products/1320-ported-ford-performance-cobra-jet-50l-intake-manifold

Sponsored

 

[JohnWimsey]

That is for the mono or the twin blade oval throttlebody not for two throttle bodies. Look at the mount, it only has four mounting bolt holes

 

[JohnWimsey]

 

[ShaZadam698]

Boschma's Speed Shop in Beloit WI. has made an adaptor for the Dual Throttle Bodies for the Cobra Jet intake!

 

[Germansheperd]

What’s the point if you can’t tune the car?

 

[jimgt2k24]

 

[Germansheperd]

That’s great. Beautiful car, fantastic setup.
Your never going to get the potential out of the manifold without tuning.

Sponsored