Search results

do you mean the center console compartment lid?

$700 for a hot air intake you can't work on after the vehicle has been running for a bit? no thanks! i'd rather put that towards diff gears or half a set of decent track tires

ok guys i think the "mach e bad" quota has been reached for this thread. those pictures are really cool, i quite like the first one!

no clue, sorry

i'm very sorry about that! i must've misunderstood. here should be the correct part numbers left: PR3Z-17D943-BA right: PR3Z-17D942-BA i am pretty sure those are the right ones, but with a diagram like this (red square is around the part) i can sometimes only make guesses

front knuckles are shared across everything, front wheel hubs are all the same except for the DH carbon fiber wheels, all non-brembo rear knuckles are shared, all bremo rear knuckles are shared, and rear wheel hubs are the same story as the fronts

if you have an automatic transmission, that noise is 100% normal and is the trans fluid pump due to it having straight cut gears to drive it. my M1 had it, my EcoBoost had it, and my DH has it too

PMPC-19500-7490A

i went to a shop that does vinyl and gave them a picture of what i wanted. i don't have the skills to put down vinyl like that. it's completely unique and custom

here's the part number for Atlas Blue touchup paint from Ford PMPC-19500-7440A

don't worry about it. i've gotten over 150mph and my hood is still on solid, so yours is gonna be fine

i have seen the most Gs doing autocross, i've seen up to 1.24G left, 1.21G right, 1.24G braking, and 0.79G acceleration

there are only 7 things that can be programmed to the favorite button 1. calm screen on/off 2. auto hold on/off 3. quiet exhaust mode on/off (requires active exhaust) 4. normal exhaust mode on/off (requires active exhaust) 5. sport exhaust mode on/off (requires active exhaust) 6. track exhaust...

from Ford's workshop manual on how to remove the pony emblem pony emblems are a separate part Chrome: PR3Z-8A224-A Black: PR3Z-8A224-B Bronze: PR3Z-8A224-C Dark Tarnish (DH): PR3Z-8A224-D

Item GT PP (401A) Dark Horse (600A, non-hp) Brakes 1-piece front rotor, Black/Red/Grabber Blue calipers 2-piece front rotor, Black/Grabber Blue/Notorious Blue calipers Suspension Optional Magneride Magneride Standard Interior Chrome trim, heated and cooled leather seats, heated...

there is many, as the dash and center console wiring harness are one

in theory you can retrofit the drift brake, but in reality it would require replacing the center console, getting all the parts for the handle, and replacing the center console+dashboard wiring harness, due to a different pin layout between drift brake and regular parking brake. labor times for...

2 days ago, a new SSM was released. see the main post for more details

it comes in a few parts Drift Brake Lever Mechanism: PR3Z-2780-A Drift Brake Handle: PR3Z-2N672-A "MUSTANG" Bolt for Drift Brake Handle: W721985-S900 it's so much work, including dropping the oil pan which requires lifting the engine. not worth it left: PR3Z-5411779-A right: PR3Z-9911778-A

im guessing its not gonna be long until 🧵🔒