Will Brembo (or anyone) make ceramic pads for the Grabber Blue brakes?

[20ducks]

I contacted both Brembo and EBC for dust-free type pads earlier this year. Nothing available and no idea for the future. Is there any hope for these out there??

Sponsored

 

[Lastoutlaw_21]

I contacted both Brembo and EBC for dust-free type pads earlier this year. Nothing available and no idea for the future. Is there any hope for these out there??

I just installed powerstop Z26 extreme carbon ceramic for my DH. after 2 weeks the brake dust is great lol.

 

[20ducks]

I just installed powerstop Z26 extreme carbon ceramic for my DH. after 2 weeks the brake dust is great lol.

These are for the 6 cyl Grabber Blue brakes??

 

[Sofa King]

The G-Loc pads are available (several compounds).

 

[Lastoutlaw_21]

These are for the 6 cyl Grabber Blue brakes??

Yes think have them

 

[20ducks]

Yes think have them

I do not I understand what you have written there.

In the interest of clarity: I have ordered from Steeda front brake pads for my 2024 Mustang GT. They will replace the pads that came stock with the Brembo Grabber Blue brakes. These are low dust street pads.

Steeda 693 GPX253-GS1 MPN: gloc-brakes-GPX253-front

 

[Lastoutlaw_21]

I do not I understand what you have written there.

In the interest of clarity: I have ordered from Steeda front brake pads for my 2024 Mustang GT. They will replace the pads that came stock with the Brembo Grabber Blue brakes. These are low dust street pads.

Steeda 693 GPX253-GS1 MPN: gloc-brakes-GPX253-front

My bad, I was just saying powerstop has low brake dust pads also. They have the pads for the 6 piston front and 4 piston in the back. They were not expensive and cost me 180-200 total. I know the g-loc are more expensive. So far it's been 3 weeks since I have had the z26 pads and the brake dust has reduced by 60% plus so far.

Z26 Street Performance Carbon-Fiber Ceramic Brake Pads

https://www.powerstop.com/products/

 

[20ducks]

Did you do the brake pad swap?

 

[Lastoutlaw_21]

Did you do the brake pad swap?

Yes I did the front and rear pads. The worst part of the whole change was the rattle clip on the back of the front calipers. The rear were much easier. And the brakes do not make any noise so far

 

[20ducks]

Steeda shipped same day of order and received on time. This is one of the easiest brake pad swap I've ever done. 35 minutes total. Tomorrow I'll bed them in.

 

[tj@steeda]

Steeda shipped same day of order and received on time. This is one of the easiest brake pad swap I've ever done. 35 minutes total. Tomorrow I'll bed them in.

Glad we could help!

If you ever need anything in the future, just let us know!

TJ

 

[20ducks]

Glad we could help!

If you ever need anything in the future, just let us know!

TJ

Best place to get bedding-in procedure for my new pads?

 

[Sofa King]

Steeda shipped same day of order and received on time. This is one of the easiest brake pad swap I've ever done. 35 minutes total. Tomorrow I'll bed them in.

Let us know how they compare to the stock pads... I have a set on the shelf, just not entirely sure if I want to swap them yet. I don't like all the dust, but it has eased up a bit now with some miles on the car. The stopping power is pretty epic with the stock pads, and not sure I want to lose anything there.

Best place to get bedding-in procedure for my new pads?

Bedding in,,, I contacted G-Loc:
"Just drive nice and easy for the first 100 miles, then that is it. You do not need to get them hot and/or smoking. After 100 miles, then you're good to go."
apparently they don't require it like their track pads.

 

[Magic88]

Let us know how they compare to the stock pads... I have a set on the shelf, just not entirely sure if I want to swap them yet. I don't like all the dust, but it has eased up a bit now with some miles on the car. The stopping power is pretty epic with the stock pads, and not sure I want to lose anything there.



Bedding in,,, I contacted G-Loc:
"Just drive nice and easy for the first 100 miles, then that is it. You do not need to get them hot and/or smoking. After 100 miles, then you're good to go."
apparently they don't require it like their track pads.

How many miles do you have on yours? I'm about 4,300, and they still shed like crazy. If I drive it 3 days in a row, I can start to see it, granted my wheels are pretty bright.

You're right, the brembo's are no joke, took me a while to get used to how quick they stop.

 

[Sofa King]

How many miles do you have on yours? I'm about 4,300, and they still shed like crazy. If I drive it 3 days in a row, I can start to see it, granted my wheels are pretty bright.

You're right, the brembo's are no joke, took me a while to get used to how quick they stop.

I have 2600... wheel color helps a bit, gloss gunmetal just looks a bit less gloss after a few days.

Sponsored