What did you do to your S650 Mustang today?? 🙋🏻‍♂️

[Fusion Training Systems]

Thanks! Theyre velgen classic 5 v2s in brushed titanium 20x11 rear and 20x10 front. Its a limited run so they dont make this finish anymore im on stock non magnaride suspension atm

Car looks great. Which suspension route you plan on taking?

Trying to decide myself which springs to get. Non magnaride myself.

Sponsored

 

[Dapsters]

Car looks great. Which suspension route you plan on taking?

Trying to decide myself which springs to get. Non magnaride myself.

Im wanting steeda dual rates, my guy at ford is saying to get ford performance springs

 

[OldCoastie]

Put on the Chin Spoiler, Easy to do. Also brake caliper Covers, and replace center hub to black background and red pony, also changed out the stock Tower Brace to a Carbon Fiber. Photos follow.....

 

[Dark Sprite]

Put on the Chin Spoiler, Easy to do. Also brake caliper Covers, and replace center hub to black background and red pony, also changed out the stock Tower Brace to a Carbon Fiber. Photos follow.....
]

Which front splitter is that?

 

[steedazach]

Im wanting steeda dual rates, my guy at ford is saying to get ford performance springs

Give us a call! We would love to help you get the right springs.

 

[OldCoastie]

Im wanting steeda dual rates, my guy at ford is saying to get ford performance springs

None staying stock, I ended my long career in road racing about eight years ago, no just using car for shows and weekend trips with wife in the southeast.

 

[OldCoastie]

American Muscle, Item 444711, Chin Spoiler Lip Extension; Carbon Fiber(24-26 Mustang, Excluding Dark Horse w/ Handling Pack)

 

[OldCoastie]

Give us a call! We would love to help you get the right springs.

Sorry staying totally stock, raced professionly for years, no more, car is for pleasure.

 

[OldCoastie]

Just installed the Corsa Carbon Fiber intake ducts, (posted about that install, bad hardware included, still waiting for replacement parts on the crank case vent hose connector on the tube. Well the tubes are great love them and here is basically the install. NICE AND CLEAN.

 

[MidwayJ]

New wheels and tires. 19x10 square with 275/40 Continental ECS 02. The wheels are GTD replicas from Factory Reproductions. I'm going to swap in the OEM center caps from the old wheels.

 

[Paul's stable]

Oh yes. It doesn't matter if your car is not emitting any measurable hydrocarbons. You will fail visual inspection if you make any modifications to the emission system. This is why I went NA with all the horsepower I wanted. Otherwise you're swapping everything out every two years for a 15 minute test.

We had air testing where I live. Thank God the government got rid of it was just a cash grab.

 

[5LTR550]

Doing the final data log for wifes Gt on e85 Tonight and should be good to let her rip by tomorrow.

 

[A.alansari]

New wheels for my GT

 

[OldCoastie]

Week 2 and modifications continue. Today I focused on the red welt trim around the passenger and drivers door, see photo. Next I did the fender extensions, and the splash guards front and rear and in between the lower rocker panels all in Carbon Fiber. Did take some trimming of the wheel extensions to fit properly, best to take off each wheel to do it right. Vendor provided no direction but it was easy to figure out. See photos below, I will do better ones once I finish all the mods. Next I am replacing the hood vent with carbon fiber and the two vent piece, and have the intake pendlem coming that will be read and black fiber replacing the stock on. Still waiting for Corsa to send me the quick release connect for the passenger side air tube (Duct) so I can connect the Crank vent hose to air duct. Due tomorrow. Next: change out the automatic stick shift to round ball and installing a better trunk light. Soon should be done for now.

 

[JimC]

Week 2 and modifications continue. Today I focused on the red welt trim around the passenger and drivers door, see photo. Next I did the fender extensions, and the splash guards front and rear and in between the lower rocker panels all in Carbon Fiber. Did take some trimming of the wheel extensions to fit properly, best to take off each wheel to do it right. Vendor provided no direction but it was easy to figure out. See photos below, I will do better ones once I finish all the mods. Next I am replacing the hood vent with carbon fiber and the two vent piece, and have the intake pendlem coming that will be read and black fiber replacing the stock on. Still waiting for Corsa to send me the quick release connect for the passenger side air tube (Duct) so I can connect the Crank vent hose to air duct. Due tomorrow. Next: change out the automatic stick shift to round ball and installing a better trunk light. Soon should be done for now.

That looks good, where did you get the welt? I did that on my 2006 so it's been many years and hadn't thought about it on my 2024.

Sponsored