DH Fender Flare (Pin + Adhesive) - Poor design? Any work arounds?

[Lidsoff]

Do you have the part number of the box that was supplied with your flares in it?

I'm going to order a net new set for install.

PR3Z16268AA

That took a stupid amount of time to find but I found it.
For some reason my BOM only has one listed. I think they come in a set.

Sponsored

 

[MCS]

PR3Z16268AA

Thanks! Yeah I did some digging too. Took about 10 mins and found the R and L sides (no kit yet).

@LevittownFordParts has a kit put together that includes PR3Z16268-A and PR3Z16268-B plus the pins however getting those up here to Canada might be a little pricy.

I'll see what Blackstock Ford can quote me and then compare.

 

[sdsteele2]

If you’re having issues with the adhesive tape sticking, try 3M adhesion promoter 4298UV.

https://www.3m.com/3M/en_US/p/d/b40065475/

 

[MCS]

3M adhesion promoter 4298UV

Did some reearch on this product. Very informative. This might be the ticket.

Assuming it works similar to whatever this guy was using.



Sadly, this video shows the install but has no detail other than "watch me for 18 seconds"

 

[LevittownFordParts]

Thanks! Yeah I did some digging too. Took about 10 mins and found the R and L sides (no kit yet).

@LevittownFordParts has a kit put together that includes PR3Z16268-A and PR3Z16268-B plus the pins however getting those up here to Canada might be a little pricy.

I'll see what Blackstock Ford can quote me and then compare.

I would suggest shipping to a parcel pickup at the border, If you choose this we have a coupon code you can use.

- Benny

 

[MCS]

I would suggest shipping to a parcel pickup at the border, If you choose this we have a coupon code you can use.

- Benny

You wouldn't happen to have the instructions for installing them would you? I'm going to try redoing my existing ones with new pins and double sided tape + adhesive promoter.

 

[LevittownFordParts]

You wouldn't happen to have the instructions for installing them would you? I'm going to try redoing my existing ones with new pins and double sided tape + adhesive promoter.

I looked on the service and could not find anything, The DH even has its own wheel liner procedure but its not covered in there

- Benny

 

[MCS]

I looked on the service and could not find anything, The DH even has its own wheel liner procedure but its not covered in there

- Benny

thanks Benny. I searched for an hour last night to try and find it as I’m going to try and rescue them myself prior to spending $1500+ to replace.

Sponsored